Several connector styles are used on AiM MyChron devices.
This document will help you order the correct accessories
for your system.
| Part No. |
Description |
Comments |
| MC-001 |
MyChron Optic Lap Transmitter |
Stand alone timing unit for track's edge. Requires eight (8) AA
batteries. |
| MC-002 |
MyChron Optic Lap Receiver with 712 Connector (Auto) |
Used with Part No. MC-001 transmitter to record lap times on your
MyChron kart dash or XG-Log and MXL auto dash. Utilizes a 4-pin 712
connector to attach to dash unit. |
| MC-003 |
MyChron EGT Thermocouple |
For use with Kart or Auto dash. Patch Cable needed for all applications. Use Part No. MC-008 for all kart dashes, Part No. MC-208 for XG-Log, and Part No. MC-203 for Plus and M3 Gold dashes as well as any MXL dash which has its harness configured with a dedicated K-type connector. |
| MC-004 |
MyChron Inductive RPM Sensor |
Used on all Kart dashes only. |
| MC-005 |
Replacement Magnets for Speed Sensor |
Works with either AiM magnetic speed sensor (MC-144 or MC-216). |
| MC-006 |
MyChron Water Thermocouple |
Used in all karting applications with Part No. MC-170 Water Coupler. |
| MC-007 |
MyChron Cylinder Head Temperature Thermocouple |
Mounts under Spark Plug. Remember to always remove washer from
plug before using this part. Use with Part No. MC-203 patch cable
for any Kart or Automotive application utilizing a K-type connector. |
| MC-008 |
MyChron 712 to K-type Karting Patch Cable |
Specific only to kart dashes. All kart temp inputs are of a 3-pin
design. Use this patch cable when using an MC-003 EGT Probe, an MC-006
Water Thermocouple, or an MC-007 CHT Sensor. |
| MC-009-Basic |
MyChron3 Basic Download Kit with Race Studio 2 Software |
|
| MC-009-MXL |
MyChron MXL Download Kit with Race Studio 2 Software |
|
| MC-009-Plus |
MyChron3 Plus Download Kit with Race Studio 2 Software |
|
| MC-010 |
MyChron Optic Lap Receiver with 712 Connector (Kart) |
Specific to kart dashes only. Uses a 4-pin 712 "Screw-on" connector. |
| MC-100 |
MyChron M3 Basic Digital Kart Dash |
All kart dashes utilize 3-pin temperature inputs, with all others
being 4-pin 712 type. |
| MC-110 |
MyChron M3 T2 Digital Kart Dash (2 Temp) |
All kart dashes utilize 3-pin temperature inputs, with all others
being 4-pin 712 type. |
| MC-120 |
MyChron M3 Plus Digital Kart Dash |
All kart dashes utilize 3-pin temperature inputs, with all others
being 4-pin 712 type. |
| MC-125 |
MyChron M3 Gold Digital Kart Dash |
All kart dashes utilize 3-pin temperature inputs, with all others
being 4-pin 712 type. |
| MC-130 |
MyChron M3 Extreme Digital Kart Dash |
All kart dashes utilize 3-pin temperature inputs, with all others
being 4-pin 712 type. |
| MC-144 |
MyChron Magnetic Front Wheel Speed Sensor for kart applications,
712 Lead |
Designed to attach directly to the front spindle of your kart.
Includes a magnetic trigger which
mounts to the inside of a front wheel. Uses a 4-pin
712 "Screw-on" connector. |
| MC-145 |
MyChron Magnetic Rear Axle Speed Sensor for kart applications,
712 Lead |
This rear axle speed sensor is designed to be used with a magnetic
axle collar, Part No. MC-175. The 67 inch long
cable has a 4-pin 712 "Screw-on" connector. |
| MC-146 |
MyChron Wheel Speed Proximity Sensor for kart applications, 712
Lead |
Uses a 4-pin 712 "Screw-on" connector. |
| MC-151-Black |
MyChron M3 Basic Steering Wheel, Black |
For MyChron Kart dashes only. |
| MC-151-Blue |
MyChron M3 Basic Steering Wheel, Blue |
For MyChron Kart dashes only. |
| MC-151-Red |
MyChron M3 Basic Steering Wheel, Red |
For MyChron Kart dashes only. |
| MC-152-Black |
MyChron M3 Plus and Gold Steering Wheel, Black |
For MyChron Kart dashes only. |
| MC-152-Blue |
MyChron M3 Plus and Gold Steering Wheel, Blue |
For MyChron Kart dashes only. |
| MC-152-Red |
MyChron M3 Plus and Gold Steering Wheel, Red |
For MyChron Kart dashes only. |
| MC-160 |
MyChron Magnetic Lap Receiver |
Seldom used, this receiver utilizes a 4-pin 712 connector. |
| MC-170-3/4 |
MyChron Inline Water Coupler with 5mm Port, 3/4" Hose |
Used for in-line monitoring of water temperatures in kart applications.
Use with Part No. MC-006. |
| MC-170-5/8 |
MyChron Inline Water Coupler with 5mm Port, 5/8" Hose |
Used for in-line monitoring of water temperatures in kart applications.
Use with Part No. MC-006. |
| MC-175-1.25 |
MyChron Aluminum Axle Collar, for 1.25" Axle |
Used to house Part No. MC-005 magnets for monitoring wheel speed.
Four sizes to choose from. |
| MC-175-40mm |
MyChron Aluminum Axle Collar, for 40mm Axle |
Used to house Part No. MC-005 magnets for monitoring wheel speed.
Four sizes to choose from. |
| MC-175-45mm |
MyChron Aluminum Axle Collar, for 45mm Axle |
Used to house Part No. MC-005 magnets for monitoring wheel speed.
Four sizes to choose from. |
| MC-175-50mm |
MyChron Aluminum Axle Collar, for 50mm Axle |
Used to house Part No. MC-005 magnets for monitoring wheel speed.
Four sizes to choose from. |
| MC-180 |
MyChron Steering Angle Potentiometer (Kart) |
Used for measuring steering angles on all kart applications. Utilizes
a 4-pin 719 connector. |
| MC-200 |
MyChron3 Plus Digital Auto Dash |
Harness utilizes all 719 connectors except for (1) one K-type thermocouple. |
| MC-201-1/8 |
MyChron Automotive Oil/Coolant Temperature Sensor, 1/8 NPT |
All Automotive Temp sensors utilize 4-pin 719 connectors. |
| MC-201-10mm |
MyChron Automotive Oil/Coolant Temperature Sensor, 10mm |
All Automotive Temp sensors utilize 4-pin 719 connectors. |
| MC-201-5mm |
MyChron Automotive Oil/Coolant Temperature Sensor, 5mm |
All Automotive Temp sensors utilize 4-pin 719 connectors. |
| MC-202 |
MyChron Rotary Type Throttle Potentiometer |
Utilizes a 4-pin 719 connector. |
| MC-203 |
MyChron Thermocouple Patch Cable for Plus or Gold Auto |
K-type patch cable, male to female. Use on Plus or Gold auto dash
when needing an extension on an MC-003 EGT probe or an MC-007 CHT
sensor. |
| MC-204 |
MyChron VDO 0-30 psi Pressure Sensor with Cable |
Utilizes a 4-pin 719 connector. |
| MC-205 |
MyChron MSI 0-150 psi Oil Pressure Sensor |
Utilizes a 4-pin 719 connector. |
| MC-206-100MM |
Micron Linear Style Throttle Potentiometer, 100mm |
All automotive linear style potentiometers utilize a 4-pin 719
connector. |
| MC-206-150MM |
Micron Linear Style Throttle Potentiometer, 150mm |
All automotive linear style potentiometers utilize a 4-pin 719
connector. |
| MC-206-50MM |
Micron Linear Style Throttle Potentiometer, 50mm |
All automotive linear style potentiometers utilize a 4-pin 719
connector. |
| MC-206-75MM |
Micron Linear Style Throttle Potentiometer, 75mm |
All automotive linear style potentiometers utilize a 4-pin 719
connector. |
| MC-208 |
MyChron 712 to K-type Automotive Patch Cable |
Used mainly for temperature thermocouples when used with an XG-Log
auto dash. |
| MC-210-1M |
MyChron 712-719 Automotive Patch Cable, 1 M (3.28 ft) |
Patch cable utilizing a 4 pin male 712 ("Screw-in") plug on
one end to 719 (4-pin "Push-on") style plug on the other. |
| MC-210-2M |
MyChron 712-719 Automotive Patch Cable, 2 M (6.56 ft) |
Patch cable utilizing a 4 pin male 712 ("Screw-in")
plug on one end to 719 (4-pin "Push-on") style plug on the other. |
| MC-210-3M |
MyChron 712-719 Automotive Patch Cable, 3 M (9.84 ft) |
Patch cable utilizing a 4 pin male 712 ("Screw-in") plug on
one end to 719 (4-pin "Push-on") style plug on the other. |
| MC-210-4M |
MyChron 712-719 Automotive Patch Cable, 4 M (13.12ft) |
Patch cable utilizing a 4 pin male 712 ("Screw-in") plug on
one end to 719 (4-pin "Push-on") style plug on the other. |
| MC-211-1.5M |
MyChron 719-719 Automotive Patch Cable, 1.5M (4.9 ft) |
Patch cable utilizing a 719 (4-pin "Push-on") plug on both ends.
One side male, one side female. |
| MC-211-1M |
MyChron 719-719 Automotive Patch Cable, 1M (3.28 ft) |
Patch cable utilizing a 719 (4-pin "Push-on") plug on both ends.
One side male, one side female. |
| MC-211-2M |
MyChron 719-719 Automotive Patch Cable, 2M (6.56 ft) |
Patch cable utilizing a 719 (4-pin "Push-on") plug on both ends.
One side male, one side female. |
| MC-211-3M |
MyChron 719-719 Automotive Patch Cable, 3M (9.84 ft) |
Patch cable utilizing a 719 (4-pin "Push-on") plug on both ends.
One side male, one side female. |
| MC-211-4M |
MyChron 719-719 Automotive Patch Cable, 4M (13.12 ft) |
Patch cable utilizing a 719 (4-pin "Push-on") plug on both ends.
One side male, one side female. |
| MC-213 |
MyChron Optic Lap Receiver with 719 Connector (Auto) |
Specific to M3 Plus and Gold auto dashes only. Uses a 4-pin 719 "Push-on" connector. |
| MC-215 |
MyChron Steering Angle Potentiometer (Auto) |
Utilizes a 4-pin 719 connector. |
| MC-216 |
MyChron Magnetic Front Wheel Speed Sensor, 719 Lead |
Use with MC-200, 225 and all MXL Auto Dashes. Can also be used
with XG-Log dashes with a Part No. MC-210
(712 to 719) patch cable. |
| MC-217 |
MyChron Wheel Speed Proximity Sensor, 719 Lead |
Use with MC-200, 225 and all MXL Auto Dashes. Can also be used
with XG-Log dashes with a Part No. MC-210
(712 to 719) patch cable. |
| MC-225 |
MyChron3 Gold Digital Auto Dash |
Harness utilizes all 719 connectors except for (1) one K-type thermocouple. |
| MC-230 |
MyChron3 XG-Log Digital Auto Dash |
All connectors on XG-Log unit are 4-pin 712 type. |
| MC-235 |
MyChron MXL Strada High Performance Digital Dash |
All connections off this unit are 4-pin 719 type except for the
Lap Receiver which is a 4-pin 712 type. Note: Any
customer interested in an MXL dash must specify
if they want a K-type connector built
into their Loom. If not, all connectors for temperature,
etc, will be 719 type. (Harnesses with a K-type
connector are special order items.) |
| MC-240 |
MyChron MXL Pista High Performance Digital Dash |
All connections off this unit are 4-pin 719 type except for the
Lap Receiver which is a 4-pin 712 type. Note: Any
customer interested in an MXL dash must specify
if they want a K-type connector built
into their Loom. If not, all connectors for temperature,
etc, will be 719 type. (Harnesses with a K-type
connector are special order items.) |
| MC-245 |
MyChron MXL Pro High Performance Digital Dash |
All connections off this unit are 4-pin 719 type. Note: Any customer
interested in an MXL dash must specify if they
want a K-type connector built into their Loom.
If not, all connectors for temperature, etc,
will be 719 type. (Harnesses with a K-type
connector are special order items.) |
| MC-250 |
Micron Auto Steering Wheel |
|
