Shoulder Bushing for 1/2 Bearing to 3/8 Bolt, 4pk

These shouldered reducers are generally used with a 1/2 inch ID shock eye bearing and a 3/8" diameter bolt. They are not tapered, so the length can easily be ground shorter for tighter installations. Four bushings per package (enough for 2 bearings). Steel bushings with yellow zinc plating.

Dimensions:
ID: 3/8"
Small OD: 1/2"
Large (shoulder) OD: 5/8"
Length of shoulder: 5/16"
Installed length: 1-1/4" (assuming typical bearing ball width of 5/8")
Length of small OD section: just under 5/16" (when installed in a typical 5/8" wide ball, the two bushings will not quite meet; a gap between them allows access for a punch for removal)

We also offer Shoulder Bushings for 1/2" Bearings to fit other bolt sizes as well (Part No. 3077-050-Size).
 

Related products:

  Spherical Bearings & Shock Absorber Bearings

 
Click image for big picture

Customers who purchased this item also purchased:

Safety Retaining Washer for Rod End Bearings

AN316 Thin Jam Nut (Non-Locking Check Nut)

Alloy Steel Male Rod End, PTFE Lined

AN6 Airframe Bolt, 3/8-24 Thread

AN960 Flat Washer (100 pack)