Pegasus Auto Racing Supplies
Providing great service since 1980
| Today's Featured Items | |||
|---|---|---|---|
AiM EVO4S Data Logger, no display The EVO4S is an evolution of the EVO4 racing data logger from AiM. It has the same screw-in ports but with more power, using Race Studio 3 and XRK data files. |
Facet Cube 12v Fuel Pump, 1/8 NPT, 3-4.5 psi The Facet 40105 Cube 12 Volt Fuel Pump delivers a maximum flow of 30 GPH or 3-4.5 psi max pressure. 1/8 NPT female ports. |
Land Rover Air Intake Hose Kit Defender NAS V-8 EFI Replace the brittle ESR1316 air intake hose on your 93-97 Land Rover Defender 90 or 110! Our flexible silicone rubber hose is designed for long life. | |
Bell RS7 Helmet, Snell SA2020 / FIA 8859 The Snell SA2020 / FIA 8859 Bell RS7 auto racing helmet is based on the HP7 currently used in Formula 1 and developed with input from F1 drivers. |
SuperTrapp 1.75" Clamp-On Flange with End Cap for 3S Series This Clamp-On Flange with an end clamp is for a 3S Series SuperTrapp muffler. Fits a 1.75" diameter exhaust pipe, and includes a clamp, end cap with collection chamber, and center retaining bolt. |
AN364 Thin Nylock Jam Nut (MS20364) AN364 (MS20364 / MS21083) are Military Specification nylon locking nuts, rated at 125,000 psi and up to 250F. AN364 are half-height for bolts loaded in shear. | |
Blue Silicone Hose, 1.00" I.D. 180 degree Elbow, 4" Legs This 180 degree elbow hose is designed for automotive cooling systems. Blue silicone rubber with 3-ply reinforcement. 25mm nominal ID fits over 1" OD tubing. 63mm (2.5") centerline radius. |
Red Line Water Wetter (liquid) Red Line Water Wetter helps coolant to transfer heat. This can significantly lower cooling system temperatures. Use with coolant or with plain water for racing. |
Fuel Safe 1/2 Gallon Displacement Block This Fuel Safe 1/2 Gallon Displacement Block eliminates un-needed fuel capacity resulting in a lower vehicle weight while allowing accurate filling to the top. Measures 8.75" by 3.5" by 3.5". | |
Weber 45DCOE Carburetor The Weber 45DCOE Carburetor can be tuned to work with a wide range of 2000cc to 3000cc engines. Has a wide range of venture sizes and the ability to change jets easily. |
Cool Shirt Club 13 Quart System, Cooler and Pump Only The Cool Shirt Club 12 System has a 14 x 9.5 x 11 inch high 13-quart Platinum series cooler with an internal 12v pump to keep the driver cool for up to 3 hours. |
PFC Racing Brake Pads, FF, Lockheed LD19 (PD26/11) These PFC Racing Brake Pads fit the smaller Lockheed LD19 caliper (1.62 diameter pistons) used on many Formula Ford 1600 cars. | |
|
On Sale! Save 25% Beta Tools 1201E/DZ Screwdriver Tool for Quarter-turn Studs  The Beta Tools 1201E/DZ fits countersunk (flat head) Dzus quarter-turn fastener slots perfectly to prevent damage. Molded screwdriver-type handle for comfort. |
(H) FireBottle 10 lb. FE-36 Spare Bottle, Manual Our 10lb. FE-36 FireBottle is a replacement bottle for your system. It is fully interchangeable with FireBottle Halon bottles and can be used with the same nozzles in your old FireBottle System. |
OBP Pro-Race Throttle Pedal Assembly, Floor or Top Mount This throttle pedal comes installed in a compact floor-mount box with universal linkage that has been designed for front-engine applications. It can be converted to work in mid-engine or rear-engine layouts. | |
|
Dated 2029! Sabelt Silver Series A622 Porsche 2x2 FIA Harness, Pull Down  This FIA 8853-2016 homologated 6-point 2x2 harness from Sabelt is designed for GT and Endurance racing where the driver is using a HANS Device. The lap belts have special bolt in end plates that work with OEM Porsche mounts. |
Setrab 12V Mini Gear Oil Circulation Pump, AN8, 150 Filter This self-priming helical gear pump from Setrab is designed for transmission and differential oil cooling. Built-in mounting bracket with vibration dampers. Includes 8AN fittings with 150 micron inlet filter. |
82 Piece Self-Eject 1/4-Turn 5/16 Dia Fastener Trackside Kit Our 1/4-Turn Fastener Trackside Kit is perfect for quick repairs. You get 10 each of the most popular sizes of studs and receptacles in a handy organizer box. | |
Setrab Series 6 Oil Cooler, 10 Row, M22 Ports The brazed aluminum construction of the Setrab Series 6 oil cooler provides the maximum cooling capacity in the smallest possible space, with minimal pressure drop. |
Quick Release Housing Clamp Use our Quick Release Housing Clamp with our Push Pull Cables or Vernier Control Cables. |
MS21047 Self-Locking Nut Plate, Fixed MS21047 Nutplates are an easy way to install a captive self-locking nut behind a panel. Rivet them in place with NAS1097 solid rivets or pop rivets. | |
Top Quality, Huge Selection and Very Competitive Prices on Silicone Hose
Nearly 1,000 different part numbers are now in stock from 1/2 inch to 6 inch inside diameter. Available in black, blue or red. Save on our durable, heat-resistant, high-quality Silicone Hose. Great for coolant or turbo intake plumbing. We make it easy to find the hoses that you need:  Gates PowerGrip Hose Clamps |
Congrats to Jason Vinkemulder of Mason Michigan
Jason is the most recent winner in our $5,000 sweepstakes. Every time you place an order you'll be entered. No purchase necessary. Other past winners include: Sean McGray of Las Vegas NV |
Special Message for International Customers
Export orders make up a significant portion of our sales. Because of our high volume of international shipments, we have been able to negotiate reduced rates for expedited shipping to foreign destinations. Information on International Shipping
Pegasus Supports Racing2004 thru 2024 SCCA Runoffs® Contingency Sponsor 2012 thru 2024 Vintage Sports 2000 Series Sponsor 2014 thru 2024 Formula 600 Challenge Series Sponsor VSCDA Driver's School Sponsor NSSCC Driver's School Sponsor and many other events | |
| New: Take a Virtual Tour of our Showroom and Warehouse (go through the double doors to the left of the Hawk banner to get to the warehouse) |
|---|
Pegasus is located at 2475 S. 179th Street, New Berlin WI 53146 USA
In addition to our large warehouse, we also have a small showroom and customer service counter. If you're in the area, feel free to stop by!
Click the above photo for a behind the scenes look at our warehouse expansion project.