HANS® Devices do not require the use of 2" shoulder harnesses. In fact, the HANS® Device was designed to use 3" wide shoulder harnesses, but they must be mounted no farther apart than 3" between the belts. Narrower shoulder straps can help prevent the straps from slipping off the edge of the device.
Note: These harnesses are only legal when used with a HANS® Device! If the device is not worn, 3" belts must be used.
Recent Top Seller for this product group
The FIA/SFI RaceQuip 754 HANS harness has a pull-up snap-in lap belt. The 2 inch shoulder and sub belts can be installed as either snap-in or wrap-around mount.