Beta 1454 Vise-Mounted Cylinder Head Work Stand, Adjustable

Bring your cylinder head to you and quit stooping over your workbench! This work stand from Beta Tools mounts in your bench vise to hold your cylinder head at whatever angle you need, as high as you need. Tilts and swivels on two axes, then positively locks in position. Two long 3/8" (10mm) diameter studs are mounted on sliders in a groove, so you can move them to fit the head bolt hole spacing. Once the head is in place on the studs, lock it down with two nuts (included).

Platform measures 5.9" 150mm) long; the studs can be positioned up to about 5 1/2" apart. Studs are 4 5/8" (118mm) long, threaded down to a minimum height of 1" (25mm).