Tilton 8000-Series Hydraulic Release Bearing, 52mm, 2.04" Ht
|This item qualifies for FREE Shipping in the continental United States!|
This direct-acting throwout bearing eliminates all lost motion due to cable stretch or linkage flex. The low profile (2.04" high) makes it small enough to be adapted to many different installations. Most applications will require fabrication of an adapter plate.
The radius-faced bearing has a 52mm contact diameter for AP Racing clutches, QuarterMaster 7.25" Low Ground Clearance clutches, Tilton 8.5" clutches, and similar clutches with 1 7/8" diaphragm spring hole. Maximum travel is 0.70 inches, so a clutch pedal stop must be used to prevent damage to the clutch and the engine. Tilton recommends pairing this assembly with a 3/4" bore master cylinder (sold separately).
We also stock the Hydraulic Release Bearing 52mm Replacement Bearing (Part No. TE 163-60) and Tilton Hydraulic Release Bearing Rebuild Kit (Part No. 163-51).
Tilton 8000-Series Hydraulic Release Bearings
Click image for big picture