|This item qualifies for FREE Shipping in the continental United States!|
Brand: Optimum Balance Products (OBP)
The Pro-Race "Cockpit" 3-pedal floor-mount pedal box offers an all-in-one system that is simple to install, making it suitable for a wide range of applications. The lightweight steel assembly includes Clutch, Brake, and Throttle pedals in one unit. All pedals ride on oil-impregnated bushings for smooth, consistent operation and long life. The "Cockpit" design positions the master cylinders under the driver's feet, making it ideal for cars with little room in front of the bulkhead or firewall.
Clutch pedal: For hydraulic applications. Includes a built-in adjustable pedal stop to prevent overtravel.
Brake pedal: For dual master cylinder systems. Includes a built-in bias bar (7/16" thread, accepts standard 5/16" pushrods).
Throttle pedal: For Drive-by-Wire (ECU-controlled electronic throttle) applications. Includes a single motorsport-spec "twin pot" (dual signal) linear travel sensor. Spring-loaded with an adjustable return stop.
The Clutch and Brake pedals also feature textured aluminum pads with 3/4" of height adjustment (5:1 ratio at the center of adjustment). The all-aluminum Throttle pedal also has a textured aluminum pad with a slight curve for comfort. Weighs 5.8 lbs without master cylinders. Measures 9 5/8" Wide x 12 5/8" High at pedals x 5 9/16" Deep without master cylinders.
Master cylinders (shown) and remote bias adjuster cable are sold separately.
Note: This unit accepts remote-reservoir master cylinders with the standard 2-bolt vertical (2 1/4") mounting pattern, but the master cylinders will be tilted (rotated 45 degrees around the pushrod axis) for clearance.