37 Degree AN Flaring Tool
If you only plan to connect a few tubes to AN fittings, you may not need a tool as versatile as our High-Speed Single and Double Flaring Tool Kit. Our basic AN Flaring Tool is all you need to make 37 degree single flares on soft copper, brass, or aluminum tubing.
This flaring tool is small enough to be used hand-held, but you can also mount it in a vise for more leverage. Simply insert the tubing into the holder and clamp it in place. Position the flaring yoke over the tubing and turn the handle to advance the flaring anvil. In just a few turns, your tubing has a perfect 37 degree flare for use with any male AN fitting. Works on 3/16" (3AN), 1/4" (4AN), 3/8" (6AN), 1/2" (8AN), and 5/8" (10AN) tubing.
Connect your flared tubing to your male AN fitting using AN818 Tube Nuts (Part No. 3235) and AN819 Tube Sleeves (Part No. 3236), sold separately.
Note: Not for use with steel or stainless steel tubing!
Brake System Tools
Click image for big picture