Kart Throttle Cable Clamp, Figure-8 Style
This simple clamp holds a loop in your 1/16" cable without damaging the cable.
- Run the cable through the bracket, on the left side of one stud and crossing over to the right side of the other stud.
- Loop your cable around the pedal or throttle arm.
- Run the cable through the bracket on the opposite side of the studs from the first cable. The two cables should cross.
- Install the cover plate over the cables and snug down the nuts. The cover should bear down on the spot where the cables cross.
Karting Pedals & Pedal Covers
Karting Carb and Fuel Accessories, 2-cycle
Karting Carb and Fuel Accessories, 4-cycle
Click image for big picture