Shop With Confidence - 30 Day Easy Returns - No Need To Call
 
Follow us on facebook
 

Davies Craig LCD Pump / Fan Controller Kit, 12v/24v

Click for a larger picture of Davies Craig LCD Pump / Fan Controller Kit, 12v/24v
Click for a larger picture of Davies Craig LCD Pump / Fan Controller Kit, 12v/24v
View Catalog Page in PDF format
This item qualifies for FREE Shipping in the continental United States!

Brand: Davies Craig

This new all-in-one controller from Davies Craig is capable of managing an electric coolant pump or an electric fan, or both at once!

The full-function 2 3/4" wide LCD screen displays system status (including temperature set point, pump and fan on/off, and warnings) and doubles as a coolant temperature gauge. Single-button programming makes it quick and easy to change the target temperature at any time. Nine different target set points are available in 5° C increments from 60° C to 95° C (140° F to 205° F).

The pump will pulse at half-speed until the engine warms up to 5° C (10° F) below the set point, when it will begin to run steadily. If the coolant temperature rises more than 3° C (5° F) above the set point, the fan will also run. After the engine is shut off, the controller will continue to run the pump for up to 3 minutes to avoid heat soak.

Complete kit includes LCD controller/monitor, wiring harness, sensor with 1/4 NPT male thread, and a special in-line sensor adapter (mounts in any radiator hose with 30mm - 42mm / 1 5/16" - 1 5/8" ID). The sensor can also be installed in your radiator or thermostat housing if preferred. Monitor unit measures 110mm Wide x 90mm High x 30mm Deep (4.3" W x 3.5" H x 1.2" D). Operates on 12 or 24 VDC.

Qty
Part No.
Price
Stock Status
DC8000

Condition: New

$215.14
In Stock
 

REVIEW SNAPSHOT®

by PowerReviews
Davies Craig LCD Pump / Fan Controller Kit, 12v/24v
 
4.7

(based on 3 reviews)

Ratings Distribution

  • 5 Stars

     

    (2)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

100%

of respondents would recommend this to a friend.

Reviewed by 3 customers

Displaying reviews 1-3

Back to top

 
5.0

Works as advertised

By Mike

from CT

Comments about Davies Craig LCD Pump / Fan Controller Kit, 12v/24v:

I have one of the older (non LCD) units mounted on an engine test stand. When I first got, I bench tested the unit for normal operation, and then tested every alarm function on it. Only after thorough testing did I trust it enough to use it on the test stand. I've been using it for a few years now, and it has worked as advertised. The only down side here was operation of the controller itself. It wasn't really designed for guys with big fat fingers, and the controller itself felt a little cheap, but it does work. I think the newer, easier to use, LCD units should be a big improvement there. Maybe I'll get one of those for the car.

 
4.0

We are still in the process of setting up this product

By The Bourke Engine Project, LLC

from Michigan and Maine

Verified Buyer

Comments about Davies Craig LCD Pump / Fan Controller Kit, 12v/24v:

This LCD Pump/Fan Controller Kit appears to function as advertised at this point in time. The first controller we purchased for our test stand did not function properly but was not covered under warranty because of the time that had elapsed before we realized that it was not working properly. We purchased a second pump and controller for a second test stand and that is when we realized the first controller was not functioning properly because the second unit we purchased was working properly. When Pegasus was contacted as to whether the first defective controller could be replaced under warranty, they gave us a $100.00 discount on the LCD Pump/Fan Controller Kit as they stated they could not replace the old defective unit under warranty. The jury is still out on the LCD unit as it has not been put to a real test yet on our test stand. We will be more than happy to provide a future evaluation after it has been thoroughly tested. This preliminary evaluation has been provided on our use to date.

(1 of 1 customers found this review helpful)

 
5.0

Great controlability

By Joe

from Cincinnati

Verified Buyer

Comments about Davies Craig LCD Pump / Fan Controller Kit, 12v/24v:

I use to control electric fan and water pump based on max temp I want on my car, it can also be run after shutdown to minimize heat soak. Easy to use interface and installation.

Displaying reviews 1-3

Back to top