|This item qualifies for FREE Shipping in the continental United States!|
Brand: Cartek Automotive Electronics Ltd
Why run heavy battery cables all the way from your battery to your kill switch and back? The Cartek XS Battery Isolator is a compact, solid-state electrical master switch that can be mounted close to the battery. It is triggered by a push button switch which can be remote-mounted in the location specified by the rules.
Cartek isolators are designed to meet FIA and MSA requirements for electrical master kill switches. When a push button switch is pressed, the XS Isolator cuts off the ground connection to the battery.* Solid state construction means no moving parts and no potential for sparks when the switch is operated.
The isolator can be triggered by any number of normally closed, momentary-break switches (push button or toggle), connected in series using standard hookup wire (as small as 18 gauge). Just push the button to kill the system. A latching (on-off) switch located near the driver will reset the system. One red external kill switch and one internal on-off switch are included with the isolator. (Your car's ignition switch can also be used as the on-off reset switch.) We also offer additional External Pushbutton Battery Isolator Switches separately (Part No. 1068-110-Color).
The XS Isolator can be used with 7 to 18 volt electrical systems (negative ground only). The battery switching circuit can handle a constant 450 amp battery load (2000A surge capacity). Draws just 25 mA when on and zero amps when off. Maximum operating temperature 185° F. Measures 3 5/8" x 2" x 1 1/2" tall and weighs just 2 1/2 ounces. Perfect for formula cars! Designed and manufactured in the UK for professional racing.
Cartek Battery Isolator XS Instructions
*Note: Because the XS model does not have a separate ignition cut-off circuit, we recommend it for use on total-loss electrical systems only.