Brand: Wilwood Engineering
Fits Wilwood DynaPro (including forged & billet, lug mount & radial mount), DynaPro Narrow Radial Mount, and DynaPro DPHA 4-piston calipers using a central bridge bolt or two retaining pins. Not for older calipers that only use a central retaining pin. 0.49" (12mm) overall thickness including backing plate.
This pad has the same dimensions as the original Wilwood 7212 / Hawk HB237 / PFC 7754 pad shape for the Wilwood Dynalite Bridge Bolt caliper, but with raised corners instead of two central tabs straddling the bridge bolt. Note that the original 7212 pad shape is no longer offered by Wilwood. This 7812 shape is the recommended replacement.
H - PolyMatrix H is a severe-duty racing compound designed to cope with extremely high heat. Friction rises predictably from high to extra-high as temperature and pedal pressure increase. H has the highest friction level of any Wilwood pad from 1000°F to 1300°F (and is tied for first with PolyMatrix A from 800°F to 1000°F). Compatible with iron or steel rotors including stainless steel. Recommended for high-horsepower cars and cars with enough downforce to take advantage of the increased friction.