Inline Temp Gauge Adapter for 1" (25mm) Hose, with 3/8 BSP
This adapter fitting has a 3/8 BSP female port for connecting the sensing bulb on our Racetech mechanical temperature gauges. The machined aluminum adapter has a beaded nipple at each end to fit any of our 25mm / 1" ID silicone coolant hoses.
Note: Make sure that the end of your temperature sensing bulb does not touch the opposite side of the adapter! A 7/16" diameter relief has been milled into the fitting opposite of the tapped hole to accommodate a typical sensor bulb. The maximum allowable bulb length is 1 1/4", as measured from the flat port face.
Racetech Gauge Adapters & Fittings
Blue Silicone Coolant Hoses & Elbows 1" (25mm) ID
Mechanical Temperature Gauge Adapters
Inline Temperature Gauge Adapters for Silicone Hose
Black Silicone Coolant Hoses & Elbows 1" (25mm) ID