|Was $75.99 - Now only $53.19 - You save 30%!|
This is a Clearance Facet Fuel Pump. Scratch & Dent Fuel Pumps may have been emptied of their testing fluid, had wires trimmed, or just come in a worn out box. They are all tested and found to be in perfect working order.
For moderate fuel requirements of engines up to about 150 horsepower, a single Solid State fuel pump is usually sufficient. Pumps can also be combined in series or parallel to achieve any required pressure or flow. Facet fuel pumps have low power requirements (about 1 amp at 12 volts) and operate without troublesome seals or diaphragms. Built-in pressure relief means no flooding after shutting down a hot engine. Facet pumps are compatible with gasoline, alcohol blends (up to and including E85), diesel, biodiesel, and fuel additives.
Maximum fuel delivery 32 gallons per hour. Maximum pressure 4 to 6 psi. Typical flow 15 gallons per hour at 3 psi. 6AN male ports for easy hookup to -6 stainless braided racing hose.
This pump does not have an anti-siphon valve or a one-way valve, so fuel can flow in either direction when the pump is off. Facet pump number 40108 (supercedes Facet number 480602).
Beware of counterfeits! We only sell Genuine Facet pumps - not the unreliable foreign knock-offs sold elsewhere. Facet pumps are still Made in the USA.
Not sure if this is the pump you need? Check out our article on Finding the Part Number on Facet Fuel Pumps.