Order before 5:00 pm Central Time for Same Day Shipping on most In-Stock orders!
Receive a chance to win $5,000.00 CASH
Shop With Confidence - 30 Day Easy Returns - No Need To Call
Follow us on facebook

1.6L Cast Aluminum Valve Cover with Rear Threaded Port

Click for a larger picture of 1.6L Cast Aluminum Valve Cover with Rear Threaded Port
View Catalog Page in PDF format
This item qualifies for FREE Shipping in the continental United States!

Toss your old, bent, leaking stamped steel valve cover in the trash! This beautiful cast aluminum finned valve cover is designed for dry-sump Formula Ford 1600 engines and will remain straight and true for years.

This cover includes 4 special hold-down bolts and a special thin fiber valve cover gasket. It does not use the standard bolts, hold-down tabs, or cork gasket. The rear (flywheel end) is threaded 16x1.5mm for a breather outlet. For dry sump use only; no oil filler provision.

We also offer the FF1600 Cast Aluminum Valve Cover Bolts (Part No. 162-32-Bolt) and the FF1600 Cast Aluminum Valve Cover Gasket (Part No. 162-32-Gasket) separately as replacement parts.

We recommend running the spark plug wires around the front of this valve cover using our Spiro-Pro Long Spark Plug Wire Set for FF1600, Part No. 168-11-Long (sold separately). The ridges on the top of this cover are sharp enough to damage wires that are run over the top of it.

As noted in the review below, this cover will not fit high-lift or roller rocker arms. It is a bolt-on fit for stock Ford rockers and the "GT" cam on the Ford 1600 Kent Uprated pushrod engine.

Part No.
Stock Status

Condition: New

In Stock
Related Product Groups
FF1600 Top End Engine Parts


by PowerReviews
1.6L Cast Aluminum Valve Cover with Rear Threaded Port

(based on 1 review)

Ratings Distribution

  • 5 Stars



  • 4 Stars



  • 3 Stars



  • 2 Stars



  • 1 Stars



Reviewed by 1 customer

Displaying review 1

Back to top


Won't fit.

By Fred

from Wayne, PA

Verified Buyer

Comments about 1.6L Cast Aluminum Valve Cover with Rear Threaded Port:

I purchased this valve cover for my Kent 1500 pre-crossflow, as I recently had roller rockers installed. It would not fit over roller rockers. I spoke to tech support @ Pegasus & then at Titan where it was made. Seems there had been a pattern change recently & that caused the valve cover to not fit my engine. Not much Pegasus could do about it (full refund offered), but since this valve cover seems to be the only game in town, I will have to get it machined. Beautiful valve cover otherwise!

Service and delivery comments:

Tech support could not have been more helpful! A+

Displaying review 1

Back to top