Brand: OMP Racing Products
Replace damaged wiring to keep your OMP fire suppression system working! This 2-wire harness has a 2.5mm "headphone" jack to plug into the firing head. This cable includes the firing head connector only, so you can cut it to any length you need.
To make a complete cable, you may also need the OMP Control Box Cable, Part No. OMP-CD386/CAV (sold separately), which plugs into the control box.
Note that some older OMP control boxes had four individual terminals on the side instead of a connector plug. That style control box does not require the Control Box Cable. The bare wires from this cable and from the actuation switch connect directly to the four terminals.