|This item qualifies for FREE Shipping in the continental United States!|
For the ultimate in fuel scavenging, install a surge tank inside your fuel cell. A surge tank is the best way to prevent fuel starvation without overfilling your fuel cell.
This rigid plastic surge tank includes three one-way ball valves to trap up to a liter fuel inside. A high pressure pump (12 volt, 75 GPH, 95 psi) is already installed in the 6" x 6" x 4" surge tank. Includes sock filter, wiring harness, and pickup tube. Simply cut out a section from your fuel cell foam and drop the tank in. Connect the pump to your pickup and install the wiring harness in your fill plate.
For best results, we recommend placing the surge tank in the middle of the front edge of the cell. Fuel will slosh into the tank under braking as well as under cornering, ready for acceleration down the next straight.