Tilton 300 Series Hydraulic Release Bearing, 44mm Contact
|This item qualifies for FREE Shipping in the continental United States!|
This direct-acting throwout bearing eliminates all lost motion due to cable stretch or linkage flex. The compact size (just 3.02" high, 3" 3-bolt circle) makes it small enough to be adapted to almost any transmission including Hewland, Webster, and Weismann units. Most applications will require fabrication of an adapter plate.
The radius-faced bearing has a 44mm contact diameter for clutches with a 1 5/8" diameter diaphragm spring hole. This includes most QuarterMaster 4.5", 5.5", and 7.25" racing clutches (except 7.25" LGC) and Tilton OT-II (7.25") Racing Clutches. Maximum travel is 0.70 inches, so a clutch pedal stop must be used to prevent damage to the clutch and the engine. Tilton recommends pairing this assembly with a 3/4" bore master cylinder (sold separately).
We also stock the Hydraulic Release Bearing Replacement 44mm Bearing (Part No. TE 62-031) and Tilton Hydraulic Release Bearing Rebuild Kit (Part No. 163-51).
FF1600 Clutch & Flywheel Parts
Ford 2.0L Clutch & Flywheel Parts
Clutch Release Bearings & Slave Cylinders for FF1600/FF2000
Tilton 300- and 3000-Series Hydraulic Release Bearings