Order before 5:00 pm Central Time for Same Day Shipping on most In-Stock orders!
Pegasus is North America's top Aim/MyChron dealer!
 
 
 
Check us out on Instagram
 
Your IN STOCK source for quality racing supplies!
 
Follow us on facebook
 

AiM MyChron Technical Details

AiM MyChron Technical Details
Several connector styles are used on AiM devices. This document is intended to help you order the correct accessories for your system.

Connector Identification Photo for AiM MyChron Systems and Accessories

Part No. Description Comments
MC-001 AiM Optic Lap Transmitter Timing beacon for track's edge. Requires eight (8) AA batteries.
MC-003 AiM EGT Thermocouple For Kart or Auto dashes. Male K-Type Connector requires an additional patch cable for most applications.
MC-004 AiM Inductive RPM Sensor For MyChron3 and MyChron4 Kart dashes only. Does not use a plug connector.
MC-006 AiM Water Thermocouple For Kart or Auto dashes. Male K-Type Connector requires an additional patch cable for most applications.
MC-007 AiM 14mm Cylinder Head Temperature Thermocouple For Kart or Auto dashes. Male K-Type Connector requires an additional patch cable for most applications.
MC-008-01 AiM 712 3-Pin to K-type Karting Patch Cable Used only with kart dashes, or to connect thermocouples to the MC-223 Thermocouple Hub. Female K-Type connector on one end; 3-pin 712 screw-in connector on the other.
MC-009-Basic MyChron3 Basic Download Cable with Race Studio 2 Software For MyChron3 Basic kart dash only. USB download cable has a female 4-pin 719 push-on connector.
MC-009-EVO4 EVO4 Download / SMC Bridge Setup Cable with Race Studio 2 Software For EVO4 or any SMC (SmartyCam) Bridge. USB cable has 3-pin 712 screw-in connector.
MC-009-MXL MXL Download Cable with Race Studio 2 Software For most MXL dashes. USB download cable has a 1/8" (3.5mm) stereo plug.
MC-009-Plus MyChron3 Plus Download Cable with Race Studio 2 Software For all MyChron3 auto and kart dashes (except MyChron3 Basic kart dash), XG-Log, and EVO3 data logger. USB download cable has male 4-pin 719 push-on connector.
MC-010 AiM Optic Lap Receiver with 712 Connector (Kart) For kart dashes only. The short cable has a 4-pin 712 screw-in connector.
MC-011 MyChron4 Data Key Download Tool For MyChron4 kart dash only. Used for downloading data or upgrading MyChron4 firmware. A 5-pin 712 screw-in connector fits the "Exp" port on the dash or the Expansion box.
MC-013 AiM 14mm Cylinder Head Temperature Thermocouple with 712 Adapter Cable Thermocouple has a male K-Type connector; includes a female K-Type to 3-pin 712 screw-in connector patch cable. For Kart dashes, or for Thermocouple Hubs.
MC-014 AiM 14mm Cylinder Head Temperature Thermocouple with 712 Connector Thermocouple has a 3-pin 712 screw-in connector. For Kart dashes, or for Thermocouple Hubs.
MC-016 MyChron4 2T / MyChron5 2T Y-Cable, Thermocouple Two female K-Type connectors at one end accept thermocouples; 5-pin 712 screw-in connector plugs into MyChron4 2T or MyChron5 2T kart dash.
MC-017 MyChron4 2T / MyChron5 2T Y-Cable, Thermoresistive One female K-Type connector accepts a thermocouples; one 4-pin 719 push-on connector accepts a thermoresistor sensor; 5-pin 712 screw-in connector plugs into MyChron4 2T or MyChron5 2T kart dash.
MC-019 AiM Optic Lap Receiver with 712 Connector (Auto) For MXL Strada, MXL Pista, and MyChron3 XG-Log dashes only. The 2.8 m (9.2 ft) long cable has a 4-pin 712 screw-in connector.
MC-020 MXL Optic Split Transmitter Timing beacon for track's edge for split times. Different wavelength than MC-001 is recognized by all MXL dashes (not for MXL2 / MXG / MXP / MXS).
MC-027 AiM 2-Port CAN Data Hub for MyChron4 / MyChron5 Used with MyChron4 or MyChron5 kart dashes to connect CAN accessories. Hub has 2 female 5-pin 712 screw-in ports with a male 5-pin 712 screw-in connector on the end of the cable. Wired to accept an external power supply (1/4" piggyback spade connectors).
MC-029-MXL MXL (2004 only) Download Cable with Race Studio 2 Software For MXL dashes made in 2004 only. USB download cable has a 3/32" (2.5mm) stereo plug.
MC-031 MyChron4 2T / MyChron5 2T Y-Cable, 2 Thermoresistors Two 4-pin 719 push-on connectors accept a pair of thermoresistor sensors; 5-pin 712 screw-in connector plugs into MyChron4 2T or MyChron5 2T kart dash.
MC-034 AiM 10mm Cylinder Head Temperature Thermocouple with 712 Connector Thermocouple has a 3-pin 712 screw-in connector. For Kart dashes, or for Thermocouple Hubs.
MC-035 AiM 12mm Cylinder Head Temperature Thermocouple with 712 Connector Thermocouple has a 3-pin 712 screw-in connector. For Kart dashes, or for Thermocouple Hubs.
MC-037 AiM 14mm Cylinder Head Temperature Thermocouple For Kart or Auto dashes. Male K-Type Connector requires an additional patch cable for most applications.
MC-040 AiM Rotax Temperature Sensor with 712 Adapter Cable For Kart dashes only. Thermoresistor sensor has a male 719 snap-together connector; includes a female 719 to 3-pin 712 screw-in connector patch cable.
MC-100 MyChron3 Basic Digital Kart Dash All kart dashes have 3-pin 712 screw-in temperature inputs, with all others being 4-pin 712 screw-in.
MC-110 MyChron3 T2 Digital Kart Dash (2 Temp) All kart dashes have 3-pin 712 screw-in temperature inputs, with all others being 4-pin 712 screw-in.
MC-120 MyChron3 Plus Digital Kart Dash All kart dashes have 3-pin 712 screw-in temperature inputs, with all others being 4-pin 712 screw-in.
MC-125 MyChron3 Gold Digital Kart Dash All kart dashes have 3-pin 712 screw-in temperature inputs, with all others being 4-pin 712 screw-in.
MC-130 MyChron3 Extreme Digital Kart Dash All kart dashes utilize 3-pin 712 screw-in temperature inputs, with all others being 4-pin 712 screw-in.
MC-131 MyChron5 Kart Dash One 3-pin 712 screw-in connector for temperature input; one 4-pin 712 screw-in connector accepts a lap timing receiver; one 5-pin 712 screw-in connector accepts an expansion box or Data Key. Includes one thermocouple (CHT, EGT, or water).
MC-133 MyChron5 2T Kart Dash One 7-pin 712 screw-in connector accepts a Y-cable for 2 temperature inputs; one 4-pin 712 screw-in connector accepts a lap timing receiver; one 5-pin 712 screw-in connector accepts an expansion box or Data Key. Includes two thermocouples (EGT plus CHT or water).
MC-135 MyChron4 Basic Kart Dash, Amber Screen One 3-pin 712 screw-in connector accepts a temperature input; one 4-pin 712 screw-in connector accepts a lap timing receiver; one 5-pin 712 screw-in connector accepts an expansion box or Data Key.
MC-136 MyChron4 2T Kart Dash, Amber Screen One 7-pin 712 screw-in connector accepts a Y-cable for 2 temperature inputs; one 4-pin 712 screw-in connector accepts a lap timing receiver; one 5-pin 712 screw-in connector accepts an expansion box or Data Key.
MC-137 MyChron4 2T Kart Dash, Green Screen One 7-pin 712 screw-in connector accepts a Y-cable for 2 temperature inputs; one 4-pin 712 screw-in connector accepts a lap timing receiver; one 5-pin 712 screw-in connector accepts an expansion box or Data Key.
MC-138 MyChron4 Basic Kart Dash, Green Screen One 3-pin 712 screw-in connector accepts a temperature input; one 4-pin 712 screw-in connector accepts a lap timing receiver; one 5-pin 712 screw-in connector accepts an expansion box or Data Key.
MC-144 AiM Magnetic Front Wheel Speed Sensor for kart applications, 712 Lead For kart dashes. Attaches to the front spindle of your kart. Includes a magnetic trigger which mounts to the inside of a kart wheel. Has a 4-pin 712 screw-in connector.
MC-145 AiM Magnetic Rear Axle Speed Sensor for kart applications, 712 Lead For kart dashes. For use with a magnetic rear axle collar, Part No. MC-175. Has a 4-pin 712 screw-in connector.
MC-146 AiM Wheel Speed Proximity Sensor for kart applications, 712 Lead For kart dashes. Senses any metallic object passing near it. Has a 4-pin 712 screw-in connector.
MC-160 AiM Magnetic Lap Receiver For kart dashes only. This receiver utilizes a 4-pin 712 screw-in connector. Rare in the USA.
MC-180 AiM Steering Angle Potentiometer (Kart) For kart or auto dashes. Limited travel for measuring steering angles on kart applications. Has a 4-pin 719 push-on connector.
MC-181 AiM Pedal Position Sensor, Magentic (Kart) For kart dashes. Used for measuring pedal position (brake or throttle) on kart applications. Has a 4-pin 719 push-on connector but includes a 4-pin 712 screw-in adapter cable.
MC-190 AiM GPS05 Module Kit (Kart) For kart dashes (MyChron4 or MyChron5 only). Has a male 5-pin 712 screw-in connector. Includes a powered hub to avoid drawing down batteries in the MyChron dash.
MC-200 MyChron3 Plus Digital Auto Dash Harness has all 719 push-on connectors except for one female K-type connector.
MC-201 AiM Automotive Oil/Coolant Temperature Sensor For any auto dash. Thermoresistor temperature sensor, can be used for water or oil. 4-pin 719 push-on connector; XG-Log, EVO3 Pista, EVO4, and EVO4S require MC-210 (719 to 712) patch cable.
MC-202 AiM Rotary Type Throttle Potentiometer For any auto dash. "String Pot" has a 4-pin 719 push-on connector. XG-Log, EVO3 Pista, EVO4, and EVO4S require MC-210 (719 to 712) patch cable.
MC-203-01 AiM K-Type Thermocouple Extension Cable Extends the reach of any thermocouple. Has a male K-type connector on one end and a female K-type connector on the other.
MC-204 AiM VDO 0-30 psi Pressure Sensor with Cable For any auto dash. Male 4-pin 719 push-on connector. XG-Log, EVO3 Pista, EVO4, and EVO4S require MC-210 (719 to 712) patch cable.
MC-206 AiM Linear Travel Potentiometer For any auto dash. Male 4-pin 719 push-on connector. XG-Log, EVO3 Pista, EVO4, and EVO4S require MC-210 (719 to 712) patch cable.
MC-208-01 AiM 712 4-Pin to K-type Automotive Patch Cable For XG-Log, EVO4, or EVO4S only. Female K-type (thermocouple) connector on one end, and a male 4-pin 712 screw-in connector on the other.
MC-210 AiM 712-719 Automotive Patch Cables For XG-Log, EVO4, or EVO4S only. Male 4 pin 712 screw-in connector on one end and a female 4-pin 719 push-on connector on the other.
MC-211 AiM 719-719 Automotive Patch Cables For auto dashes. Male 4-pin 719 push-on connector on one end and a female 4-pin 719 push-on connector on the other.
MC-213 AiM Optic Lap Receiver with 719 Connector (Auto) For M3 Plus and Gold auto dashes, MXL Pro05 auto dash, and EVO3 data loggers. Has a male 4-pin 719 push-on connector.
MC-214 AiM Open-Tip EGT Thermocouple For Kart or Auto dashes. Male K-Type Connector. Most applications require an adapter cable.
MC-215 AiM Steering Angle Potentiometer (Auto) For auto dashes. Greater travel than the MC-180 kart version. Male 4-pin 719 push-on connector. XG-Log, EVO3 Pista, EVO4, and EVO4S require MC-210 (719 to 712) patch cable.
MC-216 AiM Magnetic Front Wheel Speed Sensor, 719 Lead For auto dashes. Male 4-pin 719 push-on connector. XG-Log, EVO3 Pista, EVO4, and EVO4S require MC-210 (719 to 712) patch cable. Requires trigger magnet(s) attached to wheel or hub.
MC-217 AiM Wheel Speed Proximity Sensor, 719 Lead For auto dashes. Male 4-pin 719 push-on connector. XG-Log, EVO3 Pista, EVO4, and EVO4S require MC-210 (719 to 712) patch cable. Senses any metallic object(s) passing in front of it.
MC-219 AiM LCU-One Lambda Controller, CAN For MXL Strada/Pista/Pro, MXL2, MXG/MXP/MXS, MXm, EVO3, EVO4/EVO4S, EVO5, SoloDL/Solo2DL, MyChron4, and MyChron5. Has a male 5-pin 712 screw-in connector. Includes O2 sensor.
MC-223 AiM TC (Thermocouple) Hub For MXL, MXL2, MXG/MXP/MXS, EVO3, EVO4/EVO4S, and EVO5. Has a male 5-pin 712 screw-in connector and four female 3-pin 712 screw-in ports. Requires K-Type to 3-pin 712 adapter cables (MC-008) for the thermocouples.
MC-224 AiM LCU-One Lambda Controller, CAN / Analog For any auto dash including MyChron3. Has a male 5-pin 712 screw-in connector for CAN connection and a 719 push-on connector for use as an analog sensor (MyChron3 series). Includes O2 sensor.
MC-225 MyChron3 Gold Digital Auto Dash Harness has all 719 push-on connectors except for one female K-type connector.
MC-229 AiM LCU-One Lambda Controller, Analog For MyChron3 series auto dashes. Has a 4-pin 719 push-on connector. Includes O2 sensor.
MC-230 MyChron3 XG-Log Digital Auto Dash All input ports on the XG-Log accept 4-pin 712 screw-in connectors.
MC-231 AiM G-Dash (Display Only) for EVO4 Configurable dash display only for EVO4 data logger (MC-334). No data functions on its own. Not compatible with EVO3, EVO4S, or EVO5. Connector cable has a male 5-pin 712 screw-in connector.
MC-232 AiM GS-Dash (Display Only) for EVO4S and EVO5 Configurable dash display only for EVO4S (MC-700) and EVO5 (MC-705) data loggers. No data functions on its own. Not compatible with EVO3 or original EVO4. Connector cable has a male 5-pin 712 screw-in connector.
MC-235 MXL Strada High Performance Digital Dash The Strada does not include a sensor harness. It is designed to get all of its data through a connection to your ECU. One 5-pin 712 screw-in port accepts a CAN expansion, and one 4-pin 712 screw-in port accepts the Lap Receiver (MC-019).
MC-236 MXS Strada High Performance Digital Dash The Strada does not include a sensor harness. It is intended to get all of its data through a connection to your ECU.
MC-237 MXS Strada High Performance Digital Dash, Icons Version The Strada does not include a sensor harness. It is intended to get all of its data through a connection to your ECU.
MC-238 Sensor Harness for MXS Strada For MXS Strada dash only. Required when using any analog sensors. Harness has all 4-pin 719 push-on connectors.
MC-240 MXL Pista High Performance Digital Dash Harness has all 4-pin 719 push-on connectors. One 5-pin 712 screw-in port accepts a CAN expansion, and one 4-pin 712 screw-in port accepts the Lap Receiver (MC-019).
MC-245 MXL Pro High Performance Digital Dash Harness has all 4-pin 719 push-on connectors except for the CAN Expansion which has a female 5-pin 712 screw-in connector.
MC-246 AiM MXS High Performance 5" Full-Color Digital Dash Harness has all 4-pin 719 push-on connectors except for the CAN Expansion which has a female 5-pin 712 screw-in connector.
MC-247 AiM MXL 2 LCD Dash Logger Harness has all 4-pin 719 push-on connectors except for the CAN Expansion which has a female 5-pin 712 screw-in connector.
MC-248 AiM MXG High Performance 7" Full-Color Digital Dash Harness has all 4-pin 719 push-on connectors except for the CAN Expansion which has a female 5-pin 712 screw-in connector.
MC-249 AiM Auxiliary Harness for MXL 2 / MXG/MXP/MXS Required for Analog channels 5-8, Speed inputs 2-4, digital outputs, and RS232 ECU connection. Harness has all 4-pin 719 push-on connectors.
MC-251 AiM MXL Pista to MXL 2 / MXG/MXP/MXS Adapter Harness Harness connects existing MXL Pista harness to MXL 2 or MXG/MXP/MXS dash.
MC-257 AiM GPS08 Module Used with MXL, MXL2, MXG/MXP/MXS, EVO3, EVO4S, and EVO5 data loggers and SmartyCam HD GP 2.2. Has a male 5-pin 712 screw-in connector.
MC-258 AiM GPS08 Module, Roof-Mount Used with MXL, MXL2, MXG/MXP/MXS, EVO3, EVO4S, and EVO5 data loggers and SmartyCam HD GP 2.2. Has a male 5-pin 712 screw-in connector.
MC-260 AiM 4-Pin 712-712 Male to Female Extension Cables For XG-Log, EVO3 Pista, EVO4, and EVO4S. These extension cables have a male 4-pin 712 screw-in connector on one end and a female 4-pin 712 screw-in connector on the other. Several lengths to choose from.
MC-261 AiM 5-Pin 712-712 Male to Female Extension Cables For any CAN expansion. These extension cables have a male 5-pin 712 screw-in connector on one end and a female 5-pin 712 screw-in connector on the other. Several lengths to choose from.
MC-264 AiM EVO4/EVO4S Y-Cable for Dual Speed Inputs For EVO4 or EVO4S only. This Y-cable has two 4-pin 719 push-on connectors to connect 2 wheel speed sensors (MC-216 or MC-217) to the EVO4 data logger. The other end has a 4-pin 712 screw-in connector.
MC-267 AiM 5-Pin 712-712 Male to Male CAN Cables These CAN cables have a male 5-pin 712 screw-in connector at each end. Connects SmartyCam HD (v1) to AiM dash or CAN Data Hub, or the Shift Light Module to an MX-Series dash.
MC-275 AiM EVO4 GPS Antenna, 1.3m For EVO4 only. The special plastic connector is not used by any other logger or dash.
MC-276 AiM EVO4 GPS Antenna, 4m For EVO4 only. The special plastic connector is not used by any other logger or dash.
MC-280 AiM String Pot Steering Angle Potentiometer (Auto) For auto dashes. Has a male 4-pin 719 push-on connector. XG-Log, EVO3 Pista, EVO4, and EVO4S require MC-210 (719 to 712) patch cable.
MC-290 AiM GT320 Wheel, OMP Bracket (Display Only) Configurable dash display for EVO4 data loggers, built into a 320mm steering wheel with 6-bolt mount. Connects to EVO4 via 5-pin 712 screw-in connector. No data functions on its own.
MC-291 AiM GT320 Wheel, SPA bracket (Display Only) Configurable dash display for EVO4 data loggers, built into a 320mm steering wheel with 3-bolt mount. Connects to EVO4 via 5-pin 712 screw-in connector. No data functions on its own.
MC-292 AiM GT350 Wheel, OMP Bracket (Display Only) Configurable dash display for EVO4 data loggers, built into a 350mm steering wheel with 6-bolt mount. Connects to EVO4 via 5-pin 712 screw-in connector. No data functions on its own.
MC-293 AiM GT350 Wheel, SPA Bracket (Display Only) Configurable dash display for EVO4 data loggers, built into a 350mm steering wheel with 3-bolt mount. Connects to EVO4 via 5-pin 712 screw-in connector. No data functions on its own.
MC-307 AiM Formula Car Wheel (Display Only), v3 Configurable dash display for EVO4S / EVO5 data loggers, built into a compact steering wheel. Connects to EVO4S / EVO5 via 5-pin 712 screw-in connector. No data functions on its own.
MC-308 AiM Formula Car Wheel (Display Only), v2 Configurable dash display for EVO4 data loggers, built into a compact steering wheel. Connects to EVO4 via 5-pin 712 screw-in connector. No data functions on its own.
MC-310 EVO3 Pro Data Logger Harness has all 4-pin 719 push-on connectors except for the CAN expansion which has a female 5-pin 712 screw-in connector.
MC-311 EVO3 Pista Data Logger Harness has all 4-pin 712 screw-in connectors except for the USB connection which takes a 4-pin 719 push-on connector. The logger body has two additional ports to accept a 5-pin 712 screw-in connector (CAN expansion) and a 4-pin 712 screw-in connector (lap timing receiver).
MC-314 AiM VDO Sensor Harness Only Supplied with VDO pressure sensors. Has two spade (forked) terminals on one end and a male 4-pin 719 push-on connector on the other.
MC-315 AiM MemoryKey Stores data from an MXL, EVO3, or EVO4 data logger for easy downloading to a computer without using the download cable. Has a USB plug on one end and a male 5-pin 712 screw-in connector on the other.
MC-320 AiM VDO 0-150 psi Pressure Sensor with Cable For any Auto dash. Has a male 4-pin 719 push-on connector. XG-Log, EVO3 Pista, EVO4, and EVO4S require MC-210 (719 to 712) patch cable.
MC-321 AiM Pedal Position Sensor (Linear Travel Pot) For any Auto dash. Has a male 4-pin 719 push-on connector. XG-Log, EVO3 Pista, EVO4, and EVO4S require MC-210 (719 to 712) patch cable.
MC-323 AiM VDO 0-72 psi Pressure Sensor with Cable For any Auto dash. Has a male 4-pin 719 push-on connector. XG-Log, EVO3 Pista, EVO4, and EVO4S require MC-210 (719 to 712) patch cable.
MC-324 AiM CAN Extension Port Used to relocate the MC-315 MemoryKey to a more convenient location. The hub end has a female 5-pin 712 screw-in port, and the end of the cable has a male 5-pin 712 screw-in connector.
MC-327 AiM 2000 psi Brake Pressure Sensor For any Auto dash. Has a male 4-pin 719 push-on connector. XG-Log, EVO3 Pista, EVO4, and EVO4S require MC-210 (719 to 712) patch cable.
MC-329 AiM 4-Port CAN Data Hub, 0.4m cable Used with MXL, MXL 2, MXS/MXP/MXG, EVO3, EVO4/EVO4S, and EVO5 to connect more CAN accessories. Hub has 4 female 5-pin 712 screw-in ports with a male 5-pin 712 screw-in connector on the end of the 40cm (15") cable.
MC-331 AiM 4-Port Channel Expansion Hub Used with MXL, MXL 2, MXS/MXP/MXG, EVO3, EVO4/EVO4S, and EVO5 to connect more standard sensors. Hub has 4 female 4-pin 712 screw-in ports with a male 5-pin 712 screw-in connector on the end of the cable.
MC-334 EVO4 Auto Data Logger All analog and digital sensor input ports on the EVO4 accept 4-pin 712 screw-in connectors. CAN expansion accepts a 5-pin 712 screw-in connector. A 3-pin 712 screw-in port accepts the MC-009-EVO4 USB cable for programming.
MC-340 AiM GPS05 Module Used with MXL, MXL 2, MXS/MXP/MXG, EVO3, and EVO5. Has a male 5-pin 712 screw-in connector. (Replaced by GPS08, MC-257 or MC-258)
MC-343 AiM MXL Dash (Display Only) for EVO4 Configurable dash display only for EVO4 data logger (MC-334). No data functions on its own. Housed in a standard MXL chassis. Connects to EVO4 via 5-pin 712 screw-in connector.
MC-346 AiM KA 0-50 psi (2 Bar) Pressure Sensor For any Auto dash. Has a male 4-pin 719 push-on connector. XG-Log, EVO3 Pista, EVO4, and EVO4S require MC-210 (719 to 712) patch cable.
MC-347 AiM KA 0-150 psi Pressure Sensor For any Auto dash. Has a male 4-pin 719 push-on connector. XG-Log, EVO3 Pista, EVO4, and EVO4S require MC-210 (719 to 712) patch cable.
MC-349 AiM KA 50 psi (2 Bar) Absolute Pressure Sensor For any Auto dash. Has a male 4-pin 719 push-on connector. XG-Log, EVO3 Pista, EVO4, and EVO4S require MC-210 (719 to 712) patch cable.
MC-351 AiM 4-Port CAN Data Hub, 1.5m cable Used with MXL, MXL 2, MXS/MXP/MXG, EVO3, EVO4/EVO4S, and EVO5 to connect more CAN accessories. Hub has 4 female 5-pin 712 screw-in ports with a male 5-pin 712 screw-in connector on the end of the 1.5m (59") cable.
MC-360 712 Binder Plug Cap This O-ring sealed cap protects any unused 712 screw-in port from the elements.
MC-361 MXS Strada High Performance Digital Dash The Strada does not include a sensor harness. It is intended to get all of its data through a connection to your ECU.
MC-363 MXS Strada High Performance Digital Dash, Icons Version The Strada does not include a sensor harness. It is intended to get all of its data through a connection to your ECU.
MC-370, 371, 372, 373, 374, 375 AiM MXS 1.2 / 1.3 High Performance 5" Full-Color Digital Dash Harness has all 4-pin 719 push-on connectors except for the CAN Expansion which has a female 5-pin 712 screw-in connector. A female 5-pin 712 screw-in port on the back of the dash accepts a special analog video camera (not a SmartyCam).
MC-401 AiM ECU Bridge, K-Line (OBD-II) Connector For SmartyCam, SmartyCam HD / HD GP (up to Rev 2.1), G-Dash, or Formula Car Wheel (v1 or v2). Has a female 5-pin 712 screw-in connector to accept an AiM CAN cable. A 3-pin 712 screw-in port accepts the MC-009-EVO4 USB cable for programming. K-Line connector plugs into OBD-II diagnostic port.
MC-402 AiM ECU Bridge, RS232 / CAN Wiring For SmartyCam, SmartyCam HD / HD GP (up to Rev 2.1), G-Dash, or Formula Car Wheel (v1 or v2). Has a female 5-pin 712 screw-in connector to accept an AiM CAN cable. A 3-pin 712 screw-in port accepts the MC-009-EVO4 USB cable for programming. TX and RX wires get spliced into your ECU harness.
MC-430, 431, 432, 433 AiM MXG 1.2 High Performance 7" Full-Color Digital Dash Harness has all 4-pin 719 push-on connectors except for the CAN Expansion which has a female 5-pin 712 screw-in connector. A female 5-pin 712 screw-in port on the back of the dash accepts a special analog video camera (not a SmartyCam).
MC-440, 441, 442, 443, 444 AiM MXP High Performance 7" Full-Color Digital Dash Harness has all 4-pin 719 push-on connectors except for the CAN Expansion which has a female 5-pin 712 screw-in connector. A female 5-pin 712 screw-in port on the back of the dash accepts a special analog video camera (not a SmartyCam).
MC-539 AiM RPM Bridge For SmartyCam, SmartyCam HD / HD GP (up to Rev 2.1), G-Dash, or Formula Car Wheel (v1 or v2). Has a female 5-pin 712 screw-in connector to accept an AiM CAN cable. A 3-pin 712 screw-in port accepts the MC-009-EVO4 USB cable for programming. Signal wires get spliced into your ignition system.
MC-540 SmartyCam (original version) The original silver-and-black rubber armored SmartyCam (viewing screen on top) had one female 7-pin 712 screw-in port for connection to AiM loggers via CAN connection. Later versions also had a female 4-pin 712 screw-in connector for an external GPS antenna.
MC-542 AiM 7-Pin 712 Male to 5-Pin 712 Male CAN Cable, 2 meter This CAN cable has a male 7-pin 712 screw-in connector at one end and a 5-pin 712 screw-in connector at the other. Connects the original SmartyCam or the latest SmartyCam HD v2 to an AiM logger.
MC-548 AiM 7-Pin 712 Male to 5-Pin 712 Male CAN Cable, 4 meter This CAN cable has a male 7-pin 712 screw-in connector at one end and a 5-pin 712 screw-in connector at the other. Connects the original SmartyCam or the latest SmartyCam HD v2 to an AiM logger.
MC-549 SmartyCam HD (v1) First-generation SmartyCam HD (viewing screen on the front with no shield over it) had one female 5-pin 712 screw-in port for connection to AiM loggers and a female 4-pin 712 screw-in connector for GPS05B module (sold separately).
MC-553 AiM GPS05B GPS Receiver for SmartyCam HD For SmartyCam HD only (not for original SmartyCam). Has one male 4-pin 712 screw-in connector. (Replaced by GPS08B, MC-591 or MC-592)
MC-554 SmartyCam HD GP, 67 degree Has one female 4-pin 712 screw-in port for GPS08B module (sold separately) and one 7-pin 712 screw-in port for CAN connection. Narrower field of vision than normal for GP.
MC-554-2.2 SmartyCam HD GP 2.2, 67 degree Has one female 5-pin 712 screw-in port for GPS08 module (sold separately), one 7-pin 712 screw-in port for CAN connection, and one 5-pin 712 screw-in port for ECU connection. Narrower field of vision than normal for GP.
MC-555 SmartyCam HD GP, 120 degree Has one female 4-pin 712 screw-in port for GPS05B module (sold separately) and one 7-pin 712 screw-in port for CAN connection. Wide field of vision for GP. (Replaced by 87 degree MC-586)
MC-558 SmartyCam HD v2, 60 degree Has one female 4-pin 712 screw-in port for GPS08B module (sold separately) and one 7-pin 712 screw-in port for CAN connection. Standard field of vision.
MC-559 SmartyCam HD v2, 120 degree Has one female 4-pin 712 screw-in port for GPS05B module (sold separately) and one 7-pin 712 screw-in port for CAN connection. Wide-angle field of vision. (Replaced by 84 degree MC-599)
MC-568 SoloDL / Solo2DL OBD-II Cable Male 7-pin 712 screw-in connector at one end plugs into SoloDL or Solo2DL. OBD-II plug at the other end connects to the diagnostic port on production vehicles.
MC-569 SoloDL / Solo2DL CAN/RS232 Wiring Harness Male 7-pin 712 screw-in connector at one end plugs into SoloDL or Solo2DL. Unterminated wires at the other end get spliced into your ECU wiring.
MC-570 Solo Lap Timer, Standalone Has one 3-pin 712 screw-in port for a DC power cord only.
MC-571 SoloDL Lap Timer, OBD-II Has one 5-pin 712 screw-in port for CAN connection and one 7-pin 712 screw-in port for ECU connection. Includes cable with K-Line connector for OBD-II diagnostic port.
MC-572 SoloDL Lap Timer, CAN/RS232 Has one 5-pin 712 screw-in port for CAN connection and one 7-pin 712 screw-in port for ECU connection. Includes harness to splice into ECU wiring.
MC-584 USB Cable for SmartyCam, MXL 2, MXG/MXS, and Solo Has one USB "A" end and one USB "Mini B" end. Works with all versions of SmartyCam and Solo. MXL 2 and MXS/MXP/MXG require USB Adapter Harness.
MC-585 LVDS Cable, SmartyCam HD GP Bullet Cam to Base, 2m Male 5-pin 712 screw-in connectors at each end. Specifically for connecting the SmartyCam HD GP (up to Rev 2.1) "lipstick" camera to the base unit. This special shielded cable is different than standard CAN cables.
MC-586 SmartyCam HD GP, 84 degree Has one female 4-pin 712 screw-in port for GPS08B module (sold separately) and one 7-pin 712 screw-in port for CAN connection. Standard field of vision for GP.
MC-586-2.2 SmartyCam HD GP 2.2, 84 degree Has one female 5-pin 712 screw-in port for GPS08 module (sold separately), one 7-pin 712 screw-in port for CAN connection, and one 5-pin 712 screw-in port for ECU connection. Standard field of vision for GP.
MC-591 AiM GPS08B GPS Receiver for SmartyCam HD For SmartyCam HD / SmartyCam HD GP (up to Rev 2.1) only (not for original SmartyCam / SmartyCam GP or SmartyCam HD GP 2.2). Has one male 4-pin 712 screw-in connector.
MC-592 AiM GPS08B Roof-Mount GPS Receiver for SmartyCam HD For SmartyCam HD / SmartyCam HD GP (up to Rev 2.1) only (not for original SmartyCam / SmartyCam GP or SmartyCam HD GP 2.2). Has one male 4-pin 712 screw-in connector.
MC-598 LVDS Cable, SmartyCam HD GP Bullet Cam to Base, 1m Male 5-pin 712 screw-in connectors at each end. Specifically for connecting the SmartyCam HD GP (up to Rev 2.1) "lipstick" camera to the base unit. This special shielded cable is different than standard CAN cables.
MC-599 SmartyCam HD v2, 84 degree Has one female 4-pin 712 screw-in port for GPS08B module (sold separately) and one 7-pin 712 screw-in port for CAN connection. Wide-angle field of vision.
MC-606 Cable, SmartyCam HD GP 2.2 Bullet Cam to Base Unique "SMA" screw-in connectors at each end. Specifically for connecting the SmartyCam HD GP Rev 2.2 "lipstick" camera to the base unit. This special shielded cable is different than any other AiM cable.
MC-670 Solo2 Lap Timer, Standalone Has one 5-pin 712 screw-in port for a DC power cord only.
MC-671 Solo2DL Lap Timer, OBD-II Has one 5-pin 712 screw-in port for CAN connection and one 8-pin 712 screw-in port for ECU connection. Includes cable with K-Line connector for OBD-II diagnostic port.
MC-672 Solo2DL Lap Timer, CAN/RS232 Has one 5-pin 712 screw-in port for CAN connection and one 8-pin 712 screw-in port for ECU connection. Includes harness to splice into ECU wiring.
MC-673 Solo2DL Lap Timer, RPM Has one 5-pin 712 screw-in port for CAN connection and one 8-pin 712 screw-in port for RPM connection. Includes harness to splice into tach signal.
MC-700 EVO4S Data Logger All analog and digital sensor input ports accept 4-pin 712 screw-in connectors. CAN expansion accepts 5-pin 712 screw-in connector. USB programming port accepts 3-pin 712 screw-in connector on the MC-009-EVO4 USB cable.
MC-705 EVO5 Data Logger Harness has all 719 push-on connectors except CAN expansion, which accepts a 5-pin 712 screw-in connector.
MC-711 EVO5 Auxiliary Harness Harness has a 22-pin Deutsch connector at one end, with seven 719 push-on connectors and several unterminated wires at the other.
MC-720 AiM Memory Module Stores data from an MXL 2, MXS/MXP/MXG, or EVO4S data logger for easy downloading to a computer without using the download cable. Has a USB plug on one end and accepts an SD memory card.
MC-741 AiM Shift Light Module Connects to an MXL 2 or MXS/MXP/MXG dash. Has a female 5-pin 712 screw-in port (requires an MC-267 connector cable).
MC-751 AiM GPS09 Module Used with MXL2, MXG/MXP/MXS, EVO4S, and EVO5 data loggers and SmartyCam HD GP 2.2 (not for original MXL Series or EVO3/EVO4). Has a male 5-pin 712 screw-in connector.
MC-752 AiM GPS09 Module, Roof-Mount Used with MXL2, MXG/MXP/MXS, EVO4S, and EVO5 data loggers and SmartyCam HD GP 2.2 (not for original MXL Series or EVO3/EVO4). Has a male 5-pin 712 screw-in connector.
MC-756 AiM GPS09B GPS Receiver for SmartyCam HD For SmartyCam HD / SmartyCam HD GP (up to Rev 2.1) only (not for original SmartyCam / SmartyCam GP or SmartyCam HD GP 2.2). Has one male 4-pin 712 screw-in connector.
MC-757 AiM GPS09B Roof-Mount GPS Receiver for SmartyCam HD For SmartyCam HD / SmartyCam HD GP (up to Rev 2.1) only (not for original SmartyCam / SmartyCam GP or SmartyCam HD GP 2.2). Has one male 4-pin 712 screw-in connector.
MC-757 AiM SmartyCam/GPS Data Hub For SmartyCam HD / SmartyCam HD GP (up to Rev 2.1) only (not for original SmartyCam / SmartyCam GP or SmartyCam HD GP 2.2). Has female 5-pin 712 screw-in ports to accept GPS09, plus one male 4-pin 712 screw-in connector.

Connector Identification Photo for AiM MyChron Systems and Accessories

This article was first published on 12/4/2008.

It was most recently modified on 3/13/2019.