Pegasus is your source for Jiffy-Tite Fluid Fittings!
 
 
 
 
Shop With Confidence - 30 Day Easy Returns - No Need To Call
 
Follow us on facebook
 

Oil Pressure Warning Switch, 60psi 1/8 NPT

Click for a larger picture of Oil Pressure Warning Switch, 60psi 1/8 NPT
View Catalog Page in PDF format

This switch is designed to turn on a warning light (sold separately) when fluid pressure drops below 60 psi. The two-terminal switch makes contact when pressure is below 60 psi and breaks contact above 60 psi. This type of switch works with any of our warning lights or any other two-wire (non-grounding) or one-wire (grounding) warning light.

Our oil pressure switches are rated for 100 psi operating pressure but can take momentary over-pressures of up to 500 psi. If your engine regularly exceeds 100 psi, the switch should be replaced each season for highest reliability. We also recommend isolating the switch from engine heat and vibration by using our Combination 4AN Bulkhead Mount and 1/8 NPT Adapter, Part No. 3208-02-04S (sold separately).

To install, simply run a power wire from your ignition switch to one terminal on your warning light. Run another wire from the second terminal on your light to one terminal on this switch. Finally, run a ground wire from the second terminal on this switch to a chassis ground. When the ignition is on and pressure is below 60 psi, the switch will complete the circuit and turn on the light.

Note: If you are replacing a one-wire (grounding) pressure switch, simply install this switch as normal, then add a wire from the second terminal to a chassis ground.

Qty
Part No.
Price
Stock Status
1008

Condition: New

$59.99
Not In Stock
notify me when available
 
Related Product Groups
Oil Pressure Warning Switches