Apex Covered Universal Joint (aka: Helicopter Joints)
Hewland High-Strength Gear Set for Mk 8, 9
Boots for 94mm OD Lobro CV Joints (78mm Bolt Circle)
Girling Clutch Slave Cylinder
Girling Slave Cylinder Repair Kit
The Tilton Self-Centering piston design holds the contact bearing in place using a circlip (the alternative is Press Fit, which requires pressing the bearing into or onto the piston). Overall height 1.640". The 0.835" engagement length works with all 300, 400, and 800 series Tilton Hydraulic Release Bearing assemblies.
This is the same piston supplied with the most Tilton 300 and 400 series HRBs when supplied with 38mm or 44mm contact bearings, including:
Tilton 300-Series HRB with 38mm Contact, Part No. TE 61-303
Tilton 300-Series HRB with 44mm Contact, Part No. TE 61-302
Tilton 300-Series HRB for Swift .008 FA, Part No. TE 61-323
Tilton 400-Series HRB with 44mm Contact, Part No. TE 61-402
The Tilton HRB Contact Bearing and Tilton HRB Seal Kit (Part No. 163-61) are sold separately.
Tilton 300- and 3000-Series Hydraulic Release Bearings
Tilton Hydraulic Release Bearing Pistons
Fax Line: 262-317-1201
Email - General Questions: CustSvc@PegasusAutoRacing.com
Email - Technical Product Questions: Tech@PegasusAutoRacing.com
We do our best to ensure that the prices and descriptions shown on our website and in our printed catalog are accurate.However, we reserve the right to correct any errors that may occur.
© 2004 - 2014 Pegasus Auto Racing Supplies, Inc. - All rights reserved