Brand: Facet Electric Fuel Pumps
For moderate fuel requirements of engines up to about 150 horsepower, a single Solid State fuel pump is usually sufficient. Facet fuel pumps have low power requirements (about 1 amp at 12 volts) and operate without troublesome seals or diaphragms. Built-in pressure relief means no flooding after shutting down a hot engine. Facet pumps are compatible with gasoline, alcohol blends (up to and including E85), diesel, biodiesel, and fuel additives.
Maximum fuel delivery 32 gallons per hour. Maximum pressure 4 to 7 psi. Typical flow 15 gallons per hour at 3 psi. 1/8 NPT female ports.
This pump has a built-in check valve to ensure that fuel can only flow in one direction. It does not have an anti-siphon valve, so fuel can be pulled through when the pump is off. A Packard connector is preinstalled on the positive lead. The negative lead has a ring terminal. 60" dry lift rating. This pump can also replace Facet number 40289.
Beware of counterfeits! We only sell Genuine Facet pumps - not the unreliable foreign knock-offs sold elsewhere. Facet pumps are still Made in the USA.
Not sure if this is the pump you need? Check out our article on Finding the Part Number on Facet Fuel Pumps.