Enter desired order quantities below, then click the "Add selected quantities to cart" button.
Bell GTX.2 Helmet, Snell SAH2010 Approved
|This item qualifies for FREE Shipping in the continental United States!|
The GTX.2 helmet delivers professional-level aerodynamic stability at high speeds for a reasonable price. A front chin spoiler and a rear "duck bill" wicker molded into the composite shell significantly reduce helmet lift. Venturi chin vents pull air out rather than ramming it in, making the GTX.2 ideal for dirt or clay tracks. Certified for use with HANS® Devices, with threaded inserts for HANS® anchors factory-installed (anchors sold separately). Available in white or matte black. Snell SAH2010 rated.
The SAH2010 rating is the latest Snell Foundation rating for automotive racing helmets. This helmet rating has been developed to provide the best safety protection for auto racing drivers who are restrained in their vehicles, with additional tests to ensure compatibility with HANS® Devices. An SA-rated helmet may not meet DOT specifications for street use, such as on motorcycles.
SIZING: Helmets should fit as snug as possible without causing discomfort. Measure head circumference around the largest part of the head approximately one inch above the eyebrows and just above the ears. If a one or two layer Nomex hood will be worn with the helmet, it should be worn when measuring head circumference. If a hood is not available, add about 1/4 inch to the circumference measurement for a single layer hood and 1/2 inch for a double layer hood.
|Bell GTX.2 Sizing Chart|
|Inches||22 3/8||22 3/4||23 1/8||23 1/2||23 7/8||24 1/4|
|Size||7 1/8||7 1/4||7 3/8||7 1/2||7 5/8||7 3/4|
The GTX.2 takes the Bell 287SRV Helmet Shield (Part No. 2312-008). One clear shield with matching visor strip (white for white helmets, black for matte black) is included with this helmet.
Tear-Off Shields for Bell 287 SRV Shield (Part No. BE250) are sold separately.