|This item qualifies for FREE Shipping in the continental United States!|
Brand: Bell Racing
The GP.2 is based on the HP3 helmet built for Formula One drivers. The carbon-composite shell has a very narrow eyeport, and the chin bar has a small lip spoiler to combat aerodynamic lift. A special forehead vent intake directs air into vent ports on the forehead. Certified for use with HANS® Devices, with threaded inserts for HANS® anchors factory-installed (anchors sold separately). Available in white only. Snell SAH2010 rated.
The SAH2010 rating is the latest Snell Foundation rating for automotive racing helmets. This helmet rating has been developed to provide the best safety protection for auto racing drivers who are restrained in their vehicles, with additional tests to ensure compatibility with HANS® Devices. An SA-rated helmet may not meet DOT specifications for street use, such as on motorcycles.
SIZING: Helmets should fit as snug as possible without causing discomfort. Measure head circumference around the largest part of the head approximately one inch above the eyebrows and just above the ears. If a one or two layer Nomex hood will be worn with the helmet, it should be worn when measuring head circumference. If a hood is not available, add about 1/4 inch to the circumference measurement for a single layer hood and 1/2 inch for a double layer hood.
|Bell GP.2 Sizing Chart
||21 1/4 ||21 5/8 ||22 ||22 3/8 ||22 3/4 ||23 1/8 ||23 1/2 ||23 7/8 ||24 1/4
||54 ||55 ||56 ||57 ||58 ||59 ||60 ||61 ||62
||6 3/4 ||6 7/8 ||7 ||7 1/8 ||7 1/4 ||7 3/8 ||7 1/2 ||7 5/8 ||7 3/4
Accessories and replacement parts:
Bell 287SRV Helmet Shield, Part No. 2312-008 (helmet includes one clear shield with visor strip)
Tear-Off Shields for Bell 287 SRV Shield Part No. BE250 (sold separately)
Bell GP.2 Forehead Vent Intake, Part No. BE202 (included with helmet)
Bell GP.2 Chin Bar Gurney Aero Kit, Part No. BE207