OBP Remote Reservoir Master Cylinder

Brand: Optimum Balance Products (OBP)

These master cylinders have been designed by obp Motorsport as a less-expensive alternative to the Girling brand. The outet port faces the rear of the car, which is ideal for cars with limited space in front of the master cylinder. All sizes come complete with a pushrod. The pushrod measures 3.3" long overall (approximately 3" exposed from the mounting flange). Suitable for brakes or clutch.

• Outlet Port Thread: 3/8-24 (3AN)
• Inlet Port Thread: 7/16-20 (4AN)
• Pushrod Thread: 5/16-24
• Cylinder Length (measured from mounting face): 4.2"
• Mounting Hole Spacing: 2 1/4" (vertical)
• Stroke: 1.375"

Note: These master cylinders are not manufactured by Girling, Lucas, or TRW. They are very high-quality reproductions, made in the UK as an alternative to the (increasingly expensive) original. All dimensions and threads are the same as on the Girling.

Reservoirs and Inlet Hoses, sold separately:
Large Reservoir with Centered 7/16-20 Threaded Outlet (Part No. 3574)
Medium Reservoir with Offset 7/16-20 Threaded Outlet (Part No. 3569)
Pre-Assembled 4AN PTFE Hoses