|This item qualifies for FREE Shipping in the continental United States!|
The Star Infusion is the highest-performing forced air helmet available. Bell started with their very successful Formula 1 HP3 helmet and modified the design to accomodate a forced-air cooling system. The carbon-composite shell has a very narrow eyeport with a top-mounted inlet port. A modular plate on the chin allows the addition of a side-mounted inlet port (sold separately) if desired. Certified for use with HANS® Devices, with threaded inserts for HANS® anchors factory-installed (anchors sold separately). Available in white or matte black. Snell SAH2010 rated.
The SAH2010 rating is the latest Snell Foundation rating for automotive racing helmets. This helmet rating has been developed to provide the best safety protection for auto racing drivers who are restrained in their vehicles, with additional tests to ensure compatibility with HANS® Devices. An SA-rated helmet may not meet DOT specifications for street use, such as on motorcycles.
SIZING: Helmets should fit as snug as possible without causing discomfort. Measure head circumference around the largest part of the head approximately one inch above the eyebrows and just above the ears. If a one or two layer Nomex hood will be worn with the helmet, it should be worn when measuring head circumference. If a hood is not available, add about 1/4 inch to the circumference measurement for a single layer hood and 1/2 inch for a double layer hood.
|Bell Star Infusion Sizing Chart
||22 3/8 ||22 3/4 ||23 1/8 ||23 1/2 ||23 7/8 ||24 1/4
||57 ||58 ||59 ||60 ||61 ||62
||7 1/8 ||7 1/4 ||7 3/8 ||7 1/2 ||7 5/8 ||7 3/4
Accessories and replacement parts:
Bell 287SRV Helmet Shield, Part No. 2312-008 (one clear shield with matching visor strip included with helmet)
Tear-Off Shields for Bell 287 SRV Shield Part No. BE250 (sold separately)
Chin Bar Forced Air Inlet Port Plate for Bell Star Infusion, Part No. BE215
Chin Bar Block-Off Plate for Bell Star Infusion, Part No. BE210 (included with helmet)
Top Vent Outlet Plate for Bell Star Infusion, Part No. BE212
Top Forced Air Inlet Port Plate for Bell Star Infusion, Part No. BE213 (included with helmet)