Bell SE03 Anti-Fog Helmet Shield for GP.3, GTX.3 (SA15)
Pegasus Soft Spun Cotton Tee Shirt, Deep Royal Blue
HANS Pivoting Post Anchor Kit, Pro Series (all helmets)
Camloc 40S5 Heavy Duty Stud, Cross Recess
Sabelt Silver Series A622 Formula 2x2 FIA Harness, Pull Up
"Always great service and quick shipping. Recently had a small shipment lost/delayed by the carrier and Pegasus sent me a replacement part overnight at no charge. I didn't even ask. Way above and beyond!!" N.A. from Illinois
Brand: Bell Racing
The Bell GTX.3 Carbon is based on the Pro Series GTX.3 Helmet (Part No. BE144-S15) to deliver professional-level aerodynamic stability at high speeds. A front chin spoiler and a rear "duck bill" wicker molded into the genuine carbon fiber shell significantly reduce helmet lift. Venturi chin vents pull air out rather than ramming it in, making the GTX.3 Carbon ideal for dirt or clay tracks. Certified for use with HANS® Devices, with industry-standard M6 female threaded inserts for HANS® anchors factory-installed (anchors sold separately). Available in clearcoated genuine carbon fiber finish only. Snell SA2015 and FIA8859-2015 approved.
SA2015 is the latest Snell Foundation rating for automotive racing helmets. This helmet rating has been developed to provide the best safety protection for auto racing drivers who are restrained in their vehicles. SA2015 helmets are tested for flame retardance, and additional tests ensure compatibility with HANS® Devices. An SA-rated helmet may not meet DOT specifications for street use, such as on motorcycles.
SIZING: Helmets should fit as snug as possible without causing discomfort. Measure head circumference around the largest part of the head approximately one inch above the eyebrows and just above the ears. If a one or two layer Nomex hood will be worn with the helmet, it should be worn when measuring head circumference. If a hood is not available, add about 1/4 inch to the circumference measurement for a single layer hood and 1/2 inch for a double layer hood.
Accessories and replacement parts:
Bell SE03 DSAF Helmet Shield, Part No. 2312-016 (helmet includes one clear shield with visor strip)
Tear-Off Shields for Bell SE03 Shield Part No. BE252 (sold separately)
Enter desired order quantities below, then click the "Add selected quantities to cart" button.
BE124-S15-7 1/8Condition: NewSKU: 75682
Bell GTX.3 Carbon Helmet, size 7 1/8 (57), Snell SA2015
BE124-S15-7 1/4Condition: NewSKU: 75683
Bell GTX.3 Carbon Helmet, size 7 1/4 (58), Snell SA2015
BE124-S15-7 3/8Condition: NewSKU: 75684
Bell GTX.3 Carbon Helmet, size 7 3/8 (59), Snell SA2015
BE124-S15-7 1/2Condition: NewSKU: 75685
Bell GTX.3 Carbon Helmet, size 7 1/2 (60), Snell SA2015
BE124-S15-7 5/8Condition: NewSKU: 75686
Bell GTX.3 Carbon Helmet, size 7 5/8 (61), Snell SA2015
Follow us on facebook
Find us on Instagram
Pegasus Auto Racing Supplies2475 S 179th StNew Berlin WI 53146 USA
Order Toll Free: 1-800-688-6946 (US & Canada)
Local/International Order Line: 1-262-317-1234
Technical Questions: 1-262-317-1200
Fax Line: 262-317-1201
Email - General Questions: CustSvc@PegasusAutoRacing.com
Email - Technical Product Questions: Tech@PegasusAutoRacing.com
We do our best to ensure that the prices and descriptions shown on our website and in our printed catalog are accurate.However, we reserve the right to correct any errors that may occur.
© 2004 - 2020 Pegasus Auto Racing Supplies, Inc. - All rights reserved