Brand: AIM Sports
The GPS08B Module connects to the AiM SmartyCam HD Video Camera (sold separately) to provide GPS data such as speed, position, acceleration, and lap timing. This information can be overlaid directly on the video image as it records -- no hassles trying to sync the data to the video afterwards!
This "roof mount" version is specifically designed for secure mounting on top of a roof. The 4 meter (13 ft) cable exits through a central 12mm threaded stud. Simply drill a 12mm or 1/2" hole through the roof panel, feed the cable through from the outside, and use the included 12 x 1.25mm nut to hold the module in position. A rubber gasket on the base of the module helps to seal out wind and water.
The GPS08B is only used with the SmartyCam HD, SmartyCam HD 2,1, or SmartyCam GP HD. It will not connect to the original SmartyCam, SmartyCam DH GP 2.2, or to any other AiM data logger or dash.
The GPS08B is not needed if the SmartyCam HD is connected to an AiM logger with built-in GPS (SoloDL, EVO4, MXL2/MXG/MXS, MyChron5), or to a dash or logger with a GPS module already connected (MyChron4, MXL, or EVO3 with GPS or GPS05/GPS08).
SmartyCam HD GP 2.2 uses the same GPS08 Module (Part No. MC-258) that AiM dashes use.