Pegasus is your source for Hawk Performance Brake Pads!
 
 
 
Check us out on Instagram
 
Shop With Confidence - 30 Day Easy Returns - No Need To Call
 
Follow us on facebook
 

AiM GPS09B Roof Mount Receiver for SmartyCam HD

Click for a larger picture of AiM GPS09B Roof Mount Receiver for SmartyCam HD

Brand: AIM Sports

The GPS09B Module connects to the AiM SmartyCam HD Video Camera (sold separately) via a 4-pin 712 screw-in connector to provide GPS data such as speed, position, acceleration, and lap timing. This information can be overlaid directly on the video image as it records -- no hassles trying to sync the data to the video afterwards!

This "roof mount" version is specifically designed for secure mounting on top of a roof. The 4 meter (13 ft) cable exits through a central 12mm threaded stud. Simply drill a 12mm or 1/2" hole through the roof panel, feed the cable through from the outside, and use the included 12 x 1.25mm nut to hold the module in position. A rubber gasket on the base of the module helps to seal out wind and water.

The GPS09B is only used with the SmartyCam HD, SmartyCam HD 2,1, or SmartyCam GP HD. It will not connect to the original SmartyCam, SmartyCam HD GP 2.2, or to any other AiM data logger or dash.

The GPS09B is not needed if the SmartyCam HD is connected to an AiM logger with built-in GPS (MyChron5, SoloDL/Solo2DL, MXm), or to a dash or logger with a GPS module already connected (MyChron4, MX-Series, or EVO Series with GPS).

SmartyCam HD GP 2.2 uses the same GPS09 Module (Part No. MC-751) that AiM dashes use.

Enter desired order quantities below, then click the "Add selected quantities to cart" button.

Order Qty
Part No.
Desc.
Price
Status

MC-757-2.0M
Condition: New
SKU: 469

AiM GPS09B Roof Mount Receiver for SmartyCam HD, 2 Meter

$149.99In Stock

MC-757-4.0M
Condition: New
SKU: 85833

AiM GPS09B Roof Mount Receiver for SmartyCam HD, 4 Meter

$149.99In Stock