This kit includes everything you need to install a cross pin in our Steel 5/16" Pushrod Clevis, Part No. 3576 (sold separately).
Complete kit includes a high-strength AN5 bolt with matching AN960 washers, AN310 castle nut, and MS24665 cotter pin. The bolt is the correct length to work with our 5/8" wide clevis. Just install the bolt and washers through the clevis and your pedal, install the nut just finger-tight, and install the cotter pin to keep the nut from turning. One kit is enough for one clevis.
Note: We recommend finger-tight because overtightening could cause the clevis to bind. This could lead to unpredictable braking or even loss of braking effect. Please use common sense!
