Brand: Facet-Purolator
For higher fuel volume requirements of engines above about 150 horsepower, the high-performance Facet Cylindrical pumps can deliver. Facet fuel pumps have low power requirements (about 1 amp at 12 volts) and operate without troublesome seals or diaphragms. Built-in pressure relief means no flooding after shutting down a hot engine. Facet pumps are compatible with gasoline, alcohol blends (up to and including E85), diesel, biodiesel, and fuel additives.
Maximum fuel delivery 32 gallons per hour. Maximum pressure 6 to 8.5 psi. Typical flow 20 gallons per hour at 3 psi. 1/8 NPT female ports. 24 inch vertical dry lift. Negative ground (12v) only.
This pump features an internal 74 micron filter. It is not equipped with an anti-siphon valve, so fuel may be pulled through the pump when it is turned off. Facet part number 476459(E)*. This FEP59SV kit includes the pump, mounting hardware, and two 90-degree inlet/outlet adapters to accept your 5/16" ID rubber fuel hose.
* Note: The Facet “Interruptor” style pumps now feature reliable solid-state technology instead of points! The "E" stands for "Electronic".
Beware of counterfeits! We only sell Genuine Facet pumps - not the unreliable foreign knock-offs sold elsewhere.
Not sure if this is the pump you need? Check out our article on Finding the Part Number on Facet Fuel Pumps.
