Brand: Pegasus Auto Racing Supplies
These steel shoulder bushings make it easy to convert 1/2" ID bearings or rod ends to accept smaller bolts. You can grind or file the shoulder or the sleeve shorter to fit as needed. Unplated mild steel construction makes them suitable for welding into tubing as support bushings. Sold in sets of 4 (enough for two bearings).
Shoulder Bushing Dimensions |
Shoulder OD | 3/4" (19mm) |
Shoulder Height | 1/4" (6.4mm) |
Sleeve OD | 1/2" (12.7mm) |
Sleeve Length | 1/2" (12.7mm) |
If you are using these bushings to replace the old Shock Bushings (formerly Part No. CS1815B), note that the shoulder is 1/16" shorter and the sleeve length is 3/16" shorter than on the old version.