This banjo hose end is designed to work with our -2 PTFE Lined Stainless Braided Hose (Part No. 3260-2, sold separately). It is easily installed in the field without any special tooling. The neck of the banjo is slightly extended for clearance.
These hose end fittings are reusable although the brass sleeve must be replaced each time a fitting is reused. One sleeve is included with each hose end. We also offer the Spare -2 Brass Sleeves separately, Part No. 3261-2-SLEEVE.
Requires a 3/8" or 10mm Banjo Bolt and two 3/8" Copper Crush Washers (Part No. 3241-3/8), sold separately.