This versatile terminal block is great for cleaning up the wiring under the hood or behind the dash. The "non-bussed" design separates the block into 6 gangs of 2 terminals on opposite sides. Gangs are easily connected by installing a short jumper wire from one gang to the next.
Each position has a #8 screw (1/4" long shank) to connect wires from 10 to 22 gauge. Simply install a #8 ring terminal on your wire and attach it to the screw. Multiple ring terminals can be stacked on each screw allowing up to 4 wires to be connected at each position. Gangs are separated by tall insulating walls to prevent accidental short circuits.
The terminal block has holes at each end to accept 1/4" or 6mm mounting screws or bolts (not included). Rated for -40° C to 130° C (-40° F to 260° F) operating temperature and 30A @ 600V capacity. Measures 4 3/8" long overall x 1 3/8" wide x 5/8" high. Each terminal screw can accept either a flat blade or Phillips head screwdriver.
