Brand: Cartek Automotive Electronics Ltd
This wiring harness set makes it easy to hook up your Cartek 16-Channel Power Distribution Panel, Part No. 1068-151 (sold separately).
Includes both AMP connectors and a full array of 39 wires, each pre-crimped to a terminal. The pins which are always used regardless of configuration are pre-assembled to the connector housing. For those pins which must be chosen depending on configuration (e.g., ECU Input or Switch Input), the pre-crimped wires are left loose for you to install in the chosen pin socket. This eliminates unneeded wiring to save weight and bulk. Just install the loose wires in the appropriate positions in the connectors and splice to your vehicle wiring harness.
Each wire measures approximately 30cm (11 l;13/16") long. Wires are 20 AWG except where Cartek recommends 16 AWG (Switch Power Out on channels over 7.5 amps).
We also offer an unassembled Cartek Power Distribution Panel Connector and Pin Kit Only (Part No. 1068-153) for those who want full control over their wiring.
