Beta Tools 860/58 Rotating Handle 1/4" Hex Bit Driver

Brand: Beta Tools

The 860/58 Ratchet Handle from Beta Tools lets you work in the tightest, most inaccessible spots! Even if there isn't room to swing a wrench, you can still spin fasteners with this clever 90-degree driver.

In open areas, the 860/58 can be used like a standard ratchet driver. But if you don't have room to move the handle back and forth, just rotate the handle to turn the fastener! A special gear drive inside lets the 860/58 operate like a low-torque right-angle drive. The handle even ratchets, so you don't have to spin it 360 degrees.

The female 1/4" hex is designed to accept a standard 1/4" hex bit (not included). The drive is not reversible, which means that even when you rotate the handle backwards, the bit will still turn in the same direction. To reverse the drive, just insert the bit from the other side of the head.

Ratchet head measures 15mm thick (A) x 27mm OD (Ø); measures 126mm long (L) overall (0.59" A x 1.06" Ø x 4.96" L). Weighs 417g (14.7 oz). Accepts any standard 1/4" hex bit (sold separately). Sold individually.