Add a vacuum port anywhere in your silicone intake hose with this handy adapter kit! Just punch an 8mm hole in the side of the hose, feed the adapter through the hose from the inside, and tighten down the washer and nut on the outside.
The stainless steel adapter includes an O-ring for a positive seal to your hose regardless of wall thickness. Accepts a 1/4" (6mm) vacuum hose (Part No. VH06-Color, sold separately). Not for use on rigid tubing or armored (stainless braided) hose.
Tip: Although this adapter can be installed anywhere in a straight hose or an elbow hose, we recommend placing it close enough to the end of the hose to get a wrench on the adapter hex. Also note that the hose will have to deform slightly to meet the adapter sealing surfaces. Be sure to pick a spot with enough room for the hose to flatten out a bit.