8 degree Offset Cam/Sprocket Dowel
7 degree Offset Cam/Sprocket Dowel
5 degree Offset Cam/Sprocket Dowel
6 degree Offset Cam/Sprocket Dowel
4 degree Offset Cam/Sprocket Dowel
"These folks are the best -- best products, service, shipping times, etc. Have been consistently delighted with everything I've gotten from them." B.H. from Michigan
This offset dowel can be used to advance or retard cam timing by 9 degrees on the Ford 1600cc Kent pushrod engine. Fits the standard (unmodified) cam sprocket with a 5/16" hole.
Note that some sprockets were modified to use an offset bushing rather than this offset dowel. If your sprocket has an oversize (0.437") hole, it will require a bushing.
Follow us on facebook
Find us on Instagram
Pegasus Auto Racing Supplies2475 S 179th StNew Berlin WI 53146 USA
Order Toll Free: 1-800-688-6946 (US & Canada)
Local/International Order Line: 1-262-317-1234
Technical Questions: 1-262-317-1200
Fax Line: 262-317-1201
Email - General Questions: CustSvc@PegasusAutoRacing.com
Email - Technical Product Questions: Tech@PegasusAutoRacing.com
We do our best to ensure that the prices and descriptions shown on our website and in our printed catalog are accurate.However, we reserve the right to correct any errors that may occur.
© 2004 - 2020 Pegasus Auto Racing Supplies, Inc. - All rights reserved