1.6L Locating Dowel, Block to Bell Housing
1.6L / 2.0L Pilot Bearing for Clutch Shaft
AN6 Airframe Bolt, 3/8-24 Thread
FF1600 Crankshaft Scraper
1.6L Cam Sprocket Lock-Tab
"These guys are helpful and know what you need. Great advice, good to deal with." F.P. from New Zealand
The Ford 1600 Kent "Uprated" engine typically uses two of these hollow locating dowels. These dowels are a cheap way to ensure correct positioning of the head gasket and cylinder head, and to avoid damaging the gasket when installing the cylinder head.
1 to 7:
8 to 59:
60 to 499:
500 & up:
(based on 1 review)
Reviewed by 1 customer
Displaying review 1
Back to top
use 2 for sure...material this is made from????
from northern catshill mts,ny
Comments about 1.6L Locating Dowel, Block to Head:
Better make sure you pre-fix/test!
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
Follow us on facebook
Pegasus Auto Racing Supplies2475 S 179th StNew Berlin WI 53146 USA
Order Toll Free: 1-800-688-6946 (US & Canada)
Local/International Order Line: 1-262-317-1234
Technical Questions: 1-262-317-1200
Fax Line: 262-317-1201
Email - General Questions: CustSvc@PegasusAutoRacing.com
Email - Technical Product Questions: Tech@PegasusAutoRacing.com
We do our best to ensure that the prices and descriptions shown on our website and in our printed catalog are accurate.However, we reserve the right to correct any errors that may occur.
© 2004 - 2015 Pegasus Auto Racing Supplies, Inc. - All rights reserved