Setrab SLM Universal Oil Cooler Mounting Tab Set, Pair

Brand: Setrab Oil Coolers

This special bracket kit is designed just for mounting Setrab SLM Slimline Oil Coolers (sold separately). Each kit includes 2 L-shaped brackets, 2 M6 threaded steel backing plates, 4 rubber isolator pads (pre-cut to match the shape of the backing plates), 2 short screws (to mount the cooler to the brackets) and 4 long screws (to mount the brackets to your structure). Simply lay the parts onto your structure -- bracket, isolator, backing plate -- and run the long screws through your structure, through the stack, and into the threaded backing plate. Then run the short screws through the brackets and into the mounting bosses on your SLM cooler.

Note: Most SLM series coolers have 4 mounting bosses to accept two bracket kits. The three smallest SLM coolers (SET-53-10740, SE-53-10741, and SET-53-10743) only have 2 mounting bosses to accept one bracket kit.

For additional vibration protection, you can add another set of the rubber isolators from the Setrab Threaded Isolator Plates, Part No. SET-23-BPSTD.