This crankshaft scraper is designed for the 2.0L Ford SOHC "Pinto" engine. The 22 gauge (0.030") steel is thick enough to be rigid but thin to minimize oil pan sealing issues. We recommend using a thin smear of sealant between the scraper and the block, with a small dab of sealant at each end of the scraper. Install the oil pan gasket over the scraper and tighten the oil pan bolts as normal.
To ensure a tight fit, the pattern is cut slightly oversized. Minor trimming and fitting will be required for correct clearance to your crankshaft and connecting rods.