These spare sleeves are used with reusable hose end fittings for -4 PTFE-lined brake / clutch hose (3260-4). The brass inner sleeve must be replaced each time a fitting is reused. Sold individually; one required per hose end.
Fits the following hose end Part Nos:
3261-4-xx (standard 4AN)
3264-4-xx (forged stainless 4AN)
3262-4-xxx (banjo hose ends)
3228-010-4-xx (male NPT)
This sleeve is not used with our Part No. 3271 / 3274 hose ends for rubber-lined hose, or with our 3481 / 3484 "811" hose ends.
