Brand: Flo Fast Fluid Transfer Pumps
Fix your leaking Flo-Fast pump! This seal kit fits the original "Select Series" Flo Fast Fluid Transfer Pump to seal the cranking shaft at the pump body. The single wide seal works on all Select Series pumps, whether they were originally equipped with a single wide seal or two narrow seals.
Be sure to smear a little grease on the pump shaft and on the seal lip before installation.
Note: These rubber seals are used on the original Flo-Fast pumps only (formerly Part Nos. 2577-005, -015, and -010) only. These pumps can be identified by the S-curve on the crank arm and the yellow plastic handle. The Pro Series (2577-100, -105, -115, and -110) use different seals.