|This item qualifies for FREE Shipping in the continental United States!|
These sturdy universal dry sump tanks can be disassembled for easy and thorough cleaning. Lightweight spun aluminum construction looks great as is, or you can buff it to a high polish.
The scavenge inlet fitting is angled to spin the oil down the side of the tank, separating the air bubbles from the oil. A central two-stage baffle helps to de-aerate the oil while keeping oil from sloshing away from the lower pickup fitting. Two-piece construction allows the inlet and outlet fittings to be clocked to any angle desired. Inlet and outlet ports are both threaded to accept 22 x 1.5mm Metric O-Ring Port Adapters, sold separately. Measures 6 1/2" dia x 14" high (less filler cap and vent fittings). This size holds approximately 6.3 quarts when filled to a level slightly below the baffle.
The vent fittings on the top surface are threaded with 1/2 NPT female ports. Right angle barbed fittings are furnished for 5/8" I.D. hose. Connect the side vent fitting to the valve cover breather vent. The center vent is the vapor outlet to your catch tank.
Replacement parts available:
O-Ring for Lightweight Dry Sump Tank, Part No. 1256-208-6.5
Band Clamp for Lightweight Dry Sump Tank, Part No. 1256-211-6.5
Filler Cap for Lightweight Dry Sump Tank, Part No. 1256-210
Vent Fitting, 1/2 NPT to 5/8 Inch Hose, Part No. 1214-Fitting
Setrab Replacement 22mm O-Ring, Part No. SET-20-568019-V10
Note: These tanks are not sealed during shipment. Be sure to clean them before installation to remove all manufacturing and packing scrap.