This banjo hose end fitting is designed to work with our -3 PTFE Lined Stainless Braided Hose (Part No. 3260-3, sold separately). It is easily installed in the field without any special tooling required.
These fittings are reusable, although the brass sleeve must be replaced each time a fitting is reused. One sleeve is included with each hose end. We also offer the Spare 3AN Brass Sleeves separately, Part No. 3261-3-SLEEVE.
Requires a 3/8" or 10mm Steel Banjo Bolt and two 3/8" ID Copper Crush Washers (Part No. 3241-3/8), sold separately.