|This item qualifies for FREE Shipping in the continental United States!|
Setrab oil coolers have been popular in all levels of racing since the 1970s. The brazed aluminum construction provides the maximum cooling capacity in the smallest possible space, with minimal pressure drop. Coolers are pressure tested to 10 bar (145 psi) to ensure quality. The black epoxy finish protects against corrosion and looks great. The female -16 O-ring ports allow you to change your plumbing without having to replace the cooler.*
The Series 6 coolers measure 13" long (11 1/8" not including mounting tabs) x 1 7/8" thick. The female -16 O-ring ports are 9 9/16" center-to-center. The 50 row size measures 15 3/16" tall (not including the hex on the port fittings).
Note: All oil coolers are relatively fragile. Care must be taken to avoid stressing the fittings when tightening connections (always use a backup wrench on the cooler fitting). The cooler should be mounted in a manner that will minimize vibration.
A great way to secure your cooler is with the Setrab Series 6 Mounting Bracket Kit, Part No. SET-23-6002 (sold separately).
* Note: We do not currently offer any -16 O-ring port adapters. We offer this same size Setrab Series 6 50-Row Oil Cooler with M22 Ports (Part No. SET-650-7612), which will accept any of our M22 O-ring port adapters.