Used with Zero-Rate Helper Springs (Part No. 1875-Size, 1876-Size, or 1878-Size) to keep chassis springs centered on the spring perches when the suspension goes into extreme droop. These collars keep the Helper Springs and the chassis springs centered on the shocks.
| Spring ID | Divider
Construction | Divider ID | Divider OD | Platform
Thickness | Part No. |
|---|
| 2 1/4" | Anodized aluminum | 2 1/16" | 3 5/16" | 1/4" | 1877-2.25 |
|---|
| 2 1/2" | Glass-reinforced composite | 2 1/8" | 3 7/16" | 3/8" | 1877-2.50 |
|---|
| 60mm | Anodized aluminum | 2 1/8" | 3 7/16" | 3/8" | 1877-60mm |
|---|
Sold individually. (Two of the 2.25" dividers are shown in the photo in order to show top and the bottom details.)
For best results, install the chassis spring at the bottom, then the divider with the cup side facing up (short end up for 2.5" version), and the helper spring on top.
