Enter desired order quantities below, then click the "Add selected quantities to cart" button.
2-Piece Quick Disconnect Assembly
Connect air or coolant pipes much more quickly and more securely than with hoses and hose clamps! These Quick Disconnect Couplings use a spring retainer clip that is easily installed or removed by hand -- no tools required. Just weld the male ferrule and the female coupler to the ends of your aluminum tubes wherever you need an easily-operated connection. The double O-ring seals have been tested by an independent laboratory to be leak-free at a misalignment angle of 3 degrees under pressures up to 125psi! These two-piece kits include a male ferrule, a female coupler, and a spring retainer clip. (Each kit requires 2 O-rings, sold separately.)
|Independent Laboratory Test Results|
|125 psi at 3° for 5 minutes||250 psi at 0° for 5 minutes|
|No leaks observed at seal location||No leaks observed at seal location|
|525 psi: Burst at coupling; channel that holds retaining clip deformed|
"... [We] beat the snot out of them. After countless dyno pulls and a day at the track, we experienced zero failures. The QDCs even outlasted a blown head gasket." -- DSport Magazine, Jan '09