Shop With Confidence - 30 Day Easy Returns - No Need To Call
 
Follow us on facebook
 

Stainless Steel Worm-Drive Hose Clamp with Metal Lining

Click for a larger picture of Stainless Steel Worm-Drive Hose Clamp with Metal Lining
View Catalog Page in PDF format

These clamps prevent extrusion of the silicone hose cover through the slots found on standard worm-drive (screw-type) hose clamps. The inside of the clamp is fully-lined with a smooth, non-perforated band to prevent hose damage. The liner even protects the hose from the sharp edges of the adjuster crimp. Sold individually.

Recommended Clamp Sizes*
Hose ID Clamp ID Range Clamp Width Part No.
0.375" to 0.5" 7/16" to 7/8" 1/2" 3613-.78
0.5" to 0.75" 11/16" to 1 1/4" 1/2" 3613-1.25
0.75" to 1.25" 13/16" to 1 3/4" 1/2" 3613-1.75
1.25" to 1.75" 1 5/16" to 2 1/4" 1/2" 3613-2.25
1.75" to 2.25" 1 13/16" to 2 3/4" 1/2" 3613-2.75
2.25" to 2.5" 2 5/16" to 3 1/4" 1/2" 3613-3.25
2.5" to 3.5" 3 1/16" to 4" 1/2" 3613-4.00
3" to 4" 3 9/16" to 4 1/2" 1/2" 3613-4.50
3.5" to 4.5" 4 1/8" to 5" 9/16" 3613-5.00
4" to 5" 4 9/16" to 5 1/2" 1/2" 3613-5.50
4.5" to 5.5" 5 1/8" to 6" 9/16" 3613-6.00
5" to 6" 5 9/16" to 6 1/2" 9/16" 3613-6.50
5.5" to 6.5" 6 1/8" to 7" 9/16" 3613-7.00

*Please Note:
These recommendations are appropriate for our thick-wall Silicone Coolant and Turbo Intake Hoses. Thinner-wall hoses may require a smaller clamp. If you are unsure, measure the outside diameter of your hose AFTER it is installed on the tubing.

Protect yourself from scratches by covering the loose clamp end with a Rubber Hose Clamp End Jacket, Part No. 3615-500 (sold separately). The .500" size will fit all of the 1/2" wide clamps. This size can also be stretched to fit on the 9/16" wide clamps.

Enter desired order quantities below, then click the "Add selected quantities to cart" button.

Order Qty
Part No.
Desc.
Price
Status

3613-.78
Condition: New

Lined Hose Clamp, 0.44 to 0.78 inch diameter

1 to 9: $2.19

10 to 99: $1.95

100 & up: $1.71

In Stock

3613-1.25
Condition: New

Lined Hose Clamp, 0.69 to 1.25 inch diameter

1 to 9: $2.19

10 to 99: $1.95

100 & up: $1.71

In Stock

3613-1.38
Condition: New

Lined Hose Clamp, 0.69 to 1.375 inch diameter

1 to 9: $2.29

10 to 99: $2.04

100 & up: $1.79

In Stock

3613-1.75
Condition: New

Lined Hose Clamp, 0.81 to 1.75 inch diameter

1 to 9: $2.39

10 to 99: $2.13

100 to 999: $1.87

1000 & up: call   

In Stock

3613-2.25
Condition: New

Lined Hose Clamp, 1.31 to 2.25 inch diameter

1 to 9: $2.69

10 to 99: $2.40

100 & up: $2.11

In Stock

3613-2.50
Condition: New

Lined Hose Clamp, 1.56 to 2.50 inch diameter

1 to 9: $2.79

10 to 99: $2.49

100 & up: $2.19

In Stock

3613-2.75
Condition: New

Lined Hose Clamp, 1.81 to 2.75 inch diameter

1 to 9: $2.89

10 to 99: $2.58

100 & up: $2.27

In Stock

3613-3.25
Condition: New

Lined Hose Clamp, 2.31 to 3.25 inch diameter

1 to 7: $3.19

8 to 59: $2.85

60 & up: $2.51

In Stock

3613-4.00
Condition: New

Lined Hose Clamp, 3.06 to 4.00 inch diameter

1 to 7: $3.29

8 to 59: $2.95

60 & up: $2.60

In Stock

3613-4.50
Condition: New

Lined Hose Clamp, 3.56 to 4.50 inch diameter

1 to 7: $3.39

8 to 59: $3.04

60 & up: $2.68

In Stock

3613-5.00
Condition: New

Lined Hose Clamp, 4.06 to 5.00 inch diameter

1 to 7: $3.59

8 & up: $3.22

In Stock

3613-5.50
Condition: New

Lined Hose Clamp, 4.62 to 5.50 inch diameter

1 to 7: $3.99

8 & up: $3.58

In Stock

3613-6.00
Condition: New

Lined Hose Clamp, 5.12 to 6.00 inch diameter

1 to 7: $4.29

8 & up: $4.16

In Stock

3613-6.50
Condition: New

Lined Hose Clamp, 5.62 to 6.50 inch diameter

1 to 7: $4.29

8 & up: $4.06

In Stock

3613-7.00
Condition: New

Lined Hose Clamp, 6.12 to 7.00 inch diameter

1 to 7: $4.49

8 & up: $4.32

In Stock
 

REVIEW SNAPSHOT®

by PowerReviews
Stainless Steel Worm-Drive Hose Clamp with Metal Lining
 
4.8

(based on 36 reviews)

Ratings Distribution

  • 5 Stars

     

    (32)

  • 4 Stars

     

    (3)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (1)

97%

of respondents would recommend this to a friend.

Most Liked Positive Review

 

Great productt Pegasus says as always

As you know those orange brake hoses aren't cheap. This season I'm already on my 3rd set because of both tire rubbing and use and abuse. As we know the ends to get worn...Read complete review

As you know those orange brake hoses aren't cheap. This season I'm already on my 3rd set because of both tire rubbing and use and abuse. As we know the ends to get worn from the amount of movement from steering and after while the normal hose clamps will take advatage of the smallest rip and tear it up even more. With this 3rd set I used these hose clamps as well as some gaffer tape on the rotor inlet and on the hose. I wish I knew about the tape earlier so I could compare the difference but using both right now which is gaffer tape and these clamps. From the looks of it this will be the end of the problem thanks to Pegasus. You guys are the best as alsways!

VS

Most Liked Negative Review

 

clamps are horrible, they will not tighten up.

clamps were used on water hose lines.
they will not tighten up completely and the hoses would leak water out of them due to this.

clamps were used on water hose lines.
they will not tighten up completely and the hoses would leak water out of them due to this.

Reviewed by 36 customers

Displaying reviews 1-10

Back to top

Previous | Next »

 
4.0

works well

By appleseed

from Providence , Rhode Island

Verified Buyer

Comments about Stainless Steel Worm-Drive Hose Clamp with Metal Lining:

Works well.

  • Was this a gift?:
  • No
 
5.0

Good quality

By The Dude

from MA

Verified Buyer

Comments about Stainless Steel Worm-Drive Hose Clamp with Metal Lining:

Used many of these clamps on my after market hoses in my race car.

 
1.0

clamps are horrible, they will not tighten up.

By smp

from lake worth, fl

Verified Buyer

Comments about Stainless Steel Worm-Drive Hose Clamp with Metal Lining:

clamps were used on water hose lines.
they will not tighten up completely and the hoses would leak water out of them due to this.

 
5.0

Great liner clamps

By Fabboss

from Crowley, TX

Verified Buyer

Comments about Stainless Steel Worm-Drive Hose Clamp with Metal Lining:

We have been using these clamps for years. They work so much better than the normal worm clamps.

 
5.0

No Leaks

By Metalshavings

from northern MI

Verified Buyer

Comments about Stainless Steel Worm-Drive Hose Clamp with Metal Lining:

Installed and didn't have to retighten. No leaks and didn't pinch the hose. A must have.

 
5.0

Great productt Pegasus says as always

By NaRLeYBaRLeY

from Oceanside, CA

Verified Buyer

Comments about Stainless Steel Worm-Drive Hose Clamp with Metal Lining:

As you know those orange brake hoses aren't cheap. This season I'm already on my 3rd set because of both tire rubbing and use and abuse. As we know the ends to get worn from the amount of movement from steering and after while the normal hose clamps will take advatage of the smallest rip and tear it up even more. With this 3rd set I used these hose clamps as well as some gaffer tape on the rotor inlet and on the hose. I wish I knew about the tape earlier so I could compare the difference but using both right now which is gaffer tape and these clamps. From the looks of it this will be the end of the problem thanks to Pegasus. You guys are the best as alsways!

 
5.0

Replace your old clamps

By JohnK

from Buffalo Grove, IL

Verified Buyer

Comments about Stainless Steel Worm-Drive Hose Clamp with Metal Lining:

Even clamping force, piece of mind..

 
5.0

Excellent Quality

By TZ24

from Arizona

Verified Buyer

Comments about Stainless Steel Worm-Drive Hose Clamp with Metal Lining:

I purchased these clamps to install on my Polaris Ranger. I was installing a heater kit and the clamps included with the kit are absolute junk. These clamps are very high quality stainless steel and will not damage the heater hoses. I highly recommend these clamps and the customer service I received from Pegasus was exceptional.

 
5.0

Rare or special products for racing

By Donz

from Utah

Verified Buyer

Comments about Stainless Steel Worm-Drive Hose Clamp with Metal Lining:

Hard to find item. Worked great no leaks.

Service and delivery comments:

Good.

 
5.0

An Efficient Hose Clamp

By Cal

from Portland, Oregon

Verified Buyer

Comments about Stainless Steel Worm-Drive Hose Clamp with Metal Lining:

These hose clamps have a smooth inside finish, no teeth showing. This allows the clamp to tighten smoothly, and doesn't bit into the material of the hose or piping. Great product.

Displaying reviews 1-10

Back to top

Previous | Next »