Shop With Confidence - 30 Day Easy Returns - No Need To Call
 
Follow us on facebook
 

Heavy Duty Flexible Trim, Black - per foot

Click for a larger picture of Heavy Duty Flexible Trim, Black - per foot
View Catalog Page in PDF format

Protect wiring, plumbing, even your hands from cuts and abrasion on sharp edges! Our heavy-duty trim material is designed to add a protective finishing touch to just about any exposed edge.

This grommet material has a very high retention force thanks to the aluminum clips embedded within the plastic. No messy adhesives are needed to hold it in place. Just slip it over the edge that needs protection. We offer a wide range of thickness to accommodate applications from thin sheet metal to heavy wall fiberglass panels. If your material is a little thinner than the nominal size listed, you can crimp the clips a little tighter with pliers.

Despite the heavy-duty rating, this trim is still quite flexible and conforms easily to even compound curves. You can also notch it to make it fit very sharp corners. The pebble-grain outer vinyl layer is available in black only. Sold by the running foot. Save by purchasing a full 250 foot roll!

Note: Our flexible trim uses embedded aluminum clips. It costs a little more than the steel version you might find elsewhere, but it is lighter and much more corrosion resistant.

Heavy Duty Flexible Trim
Panel Thickness Trim Width* Groove Depth** Part No.
1/32" 0.39" 0.297" 4346-.03
1/16" 0.38" 0.295" 4346-.06
3/32" 0.38" 0.285" 4346-.09
1/8" 0.56" 0.477" 4346-.12
3/16" 0.53" 0.432" 4346-.19
1/4" 0.50" 0.408" 4346-.25

* Trim Width is the overall width of the trim from opening edge to back side.
** Groove Depth is the amount of your panel that will be covered.

Enter desired order quantities below, then click the "Add selected quantities to cart" button.

Order Qty
Part No.
Desc.
Price
Status

4346-.03-FOOT
Condition: New

1/32 inch thick Flexible Trim, Black - per foot

$1.19In Stock

4346-.03-ROLL
Condition: New

1/32 inch thick Flexible Trim, Black - 250' Roll

$209.99In Stock

4346-.06-FOOT
Condition: New

1/16 inch thick Flexible Trim, Black - per foot

$1.29In Stock

4346-.06-ROLL
Condition: New

1/16 inch thick Flexible Trim, Black - 250' Roll

$227.99In Stock

4346-.09-FOOT
Condition: New

3/32 inch thick Flexible Trim, Black - per foot

$1.29In Stock

4346-.09-ROLL
Condition: New

3/32 inch thick Flexible Trim, Black - 250' Roll

$227.99In Stock

4346-.12-FOOT
Condition: New

1/8 inch thick Flexible Trim, Black - per foot

$1.49In Stock

4346-.12-ROLL
Condition: New

1/8 inch thick Flexible Trim, Black - 250' Roll

$264.99In Stock

4346-.19-FOOT
Condition: New

3/16 inch thick Flexible Trim, Black - per foot

$1.49In Stock

4346-.19-ROLL
Condition: New

3/16 inch thick Flexible Trim, Black - 250' Roll

$264.99In Stock

4346-.25-FOOT
Condition: New

1/4 inch thick Flexible Trim, Black - per foot

$1.49In Stock

4346-.25-ROLL
Condition: New

1/4 inch thick Flexible Trim, Black - 250' Roll

$264.99In Stock
 

It's a snap

5

Looks good as advertised and a snap to cut and put on.

greatly

Lafayette La

Product was exactly as described, good price.

5

Pegasus allowed me to buy what I needed, the quantity I needed and at a fair price. I will definitely recommend to my customers and friends. Thanks

Dunc

Angleton, TX

true

Good stuff!

5

I bought this for my RV to protect the fiberglass edge around the fuel neck and cap. But there are many uses for metal, plastic, fiberglass, glass edging. It is ideal, do to the fact that it will not rust. Boats, Jeeps, Tractors........

Scottie

Dolores, Co.

true

Just What Was Needed

5

We purchased the Heavy Duty Flexible Trim in black as the product that will be utilized to finish the interior of a boat restoration project, It will provide a high qulaity finished appearance on segment of the interior that was, originally, left unfinished and had a very ugly appearance.

71ponies

watertown, SD

true

Right amount of Flex for my project

5

I'm using the Heavy Duty Flexible Trim product to finish the edging on a custom engine grill for my 1976 Porsche 912E. The heavy duty flexible trim has enough flex to dress the edge, allowing me to put the finishing touch to this project.

Mike

Ewa Beach, Hawaii

true

Heavy DutyFlexible Trim

5

This product is excellent for my intended purpose as an edging material for a custom splitter I made for my race car. While I wish it was available for thicker(3/8") material, it proved excellent for the 1/4" aluminum honey comb.

racermr2

Savannah, Ga.

true

This heavy-duty edge grommet material

5

This material is great. I used it to finish off my fuel cell and air scoop for my oil cooler. Placing it on aluminiun sheet metal protects the paint when fitting in tight spots

Bill

Southport, NC

true

Heavy Duty Flexible Trim, Black - per foot

5.0 7

100.0